Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Last year I bought a John Deere 1130SE snowblower and for the most part I was extremely happy with it's performance. I love the hand warmers, electric chute rotation, easy steer and the front end weight just to name a few.  The only problem I had, which was pretty significant, was the intermittent transmission slipping.  After sealing the transmission housing with silicone and some weather stripping, the problem was completely gone.  The remainder of the winter was very pleasing and I always looked forward to using the 1130.  I also had a second snowblower that I'm trading for a new 1330SE.  So now I'll have the 1130 and the 1330.  The 1130 will be for my business parking lot.  Some of the interesting features of the 1330 is the addition of an electric deflector control and dash area integrated headlights.  So now the chute is totally electric (both rotation and the deflector).  The slipping transmission should be resolved from water getting into the rubber/aluminum disc drive.  To fix this problem, Deere added a rubber gasket between the engine mounting plate and the transmission housing.  I'll try to post some pictures in the future.
BTW, my second choice would have been an Ariens since they seem to give people on this website support from at least one poster.  I wish Briggs, Simplicity or Deere would give the same support.

I just picked up a 1330SE from Lowe's.  Do these units have the same drivetrain issues that people were experiencing with the 1130SE?  I'm assuming they're essentially the same machine from a major component standpoint. 

Someone else also reported that this blower is worthless in hard snow due to lack of traction, but I'm not sure the individual elaborated on exactly what he meant by hard snow.  I guess his older John Deere unit had not problems.  Are wheel weights available for these units?

Yep - that was me!  And the JD people (Kudos for em) drove out and spent an hour testing it and finally agreed that it just did not meet my needs and took it back with a full refund .  I imagine that it wasn't just a JD problem, rather that any wheeeld blower woulda been similar.  The snow was hard enough to walk on.  My old JD 826 did manage to cut into it, but with some difficulty.  But, I then bought a Honda 928 with tracks and I would never look back now.  Just set the speed right and it'll chew through just about anything.  One more comment on the JD 1330 is  that I really disliked the auto steering on it.  Even in soft snow that it did blow OK, it tended to wander from side to side and took quite a bit of effort to keep it in a straight line.  And when taking just a partial cut, it had a strong tendency to pull to one side.

FYI, John Deere is phasing out their OPE and will soon be a franchise for Honda Power Equipment.

longboat wrote:
Maybe that will help JD recover from some of the damage they did to their good name.  Selling those JD badged low grade junk riding mowers at Home Depot and their outlets lowered their reputation considerably.  If I were Honda, I would have thought that move through a bit more.

It's a bit disheartening to hear of Dr Woof's issues.  This is my first snowblower, and I've never blown snow.  I grew up down south, and have lived in an apartment since moving to Michigan.  My only experience with snow has involved looking at it, playing in it and driving in it.  I just moved into a new house, and I suspect this blower is probably overkill.  My driveway is approximately 100 feet long and is 13 feet wide at the narrowest point and about 40 feet at its widest.  I've also got a decent bit of incline.

I read several reviews and pretty much settled on Ariens, Honda or John Deere.  The Hondas were just too much money for me.  It seemed that a Honda comparable in size to the 1330 would have been at least 1K more, and I wasn't exactly super excited to spend what I spent.  Even though they didn't build it themselves, I guess I just really wanted the John Deere, and I heard good things about Simplicity's products.  The local Deere dealers around here weren't even carrying them.  Most of them seemed to stick with Ariens whenever Simplicity began manufacturing the Deere products, and they also mentioned that they would soon be carrying Honda.

If I have to, I'll put duals on it and some weights.  I guess I would also be willing to try chains.  Does anyone know if they actually offer weights that can be mounted to the wheels?  Given their size, that might not even make much of a difference.

I looked at chains for the 1330.  Only dealer that had em here had nothing good to say about them.  They have special chains for the snohog tires that sit down in the deep tire grooves  but the dealer said they moght even make things worse.  It is notable that the old JD 826 DID have chains, but with the ordiary tires (not snohogs).  Also, I talked to the JD people when they came out and they did not seem very enthusiastic about chains.  If I were you I'd just try it without chains and see how it goes.  Don't get discouraged - might be fine under your snow conditions.

Modern snow threads are designed to work well without chains.  If you need chains because of glaring ice condition, change to less knobby tires and put on the chains.

Yo Stainless:

Woofy lives in Saskatchewan where the wind turns snow into concrete.  If where you live in Michigan has miles of open fields all around your house, you may experience similar problems.  If however, you're in a relatively enclosed area with lots of windbreaks (homes, trees, shrubs, etc.) you likely will not have much of an issue with drifting hard snow pack.  That is a bit too much machine for your needs.   My driveway is 18 'wide at the narrowest, 35' wide at the widest and 110' ft. long on a 10% grade.   I have a Simplicity 9528 that is more than adequate.  You will find that wrestling one of these things (particularly if you pull it backward uphill because reverse is insanely slow) will be very tiring.  Matching the machine to the job will go a long way to saving your energy and health.  Buying down a bit will also save you a few bucks.  Maybe enough to buy a decent single stage Toro or similar to take care of 90% of the snow you will see.  That's what I did.  My single stage machines see 95% of the snow removal work I do.  The Simplicity only comes out when there's over a eight inches or more of heavy wet snow.   I don't use chains and have never needed them. 

borat wrote:

Saskatchewan?  He needs to go buy some potash and help out one of my investments. 

Oh well.  My thinking was that I'd rather have too much snowblower as opposed to not enough.  I'm already making plans for a turbocharger.  I may end up using it for more than my driveway.  I believe a lot of the streets in the neighborhood where I built are currently considered private.  Based on my observations during the build, snow removal last year did not seem very timely.

In this neck of the woods they use potash instead of salt on the roads in winter.