Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello!
   I'm new here, and couldn't find this information in a search, so here I go: I have a couple of questions for anyone familiar with Ariens' late model compact snow throwers. I recently bought a used 5520 that I believe is a 2004 model. In testing it at home , I found that I can stop it's forward movement (wheels stop turning) by holding back on the handlebar. Not easy to do , but I can. Opened it up, checked belts and their adjustment, and condition and adjustment of the friction disc; all OK. Doesn't appear to affect operation, just wondering if this is normal. Second question: Is the newer 3 blade, 12" impeller/bucket ass'y a direct replacement? (Mine is 4 blade, 10") I've added a home made impeller kit, but am waiting for the next snow to see if it can do as well as my son's 2009 compact 20. Thanks.

The referenced blower housing and impeller assembly are not a direct replacement. Nearly everything has been re-engineered from your 2004 to your son's 2009 model. They are completely different machines and most parts will not interchange. I doubt you'll be able to match the newer machine. There were many upgrades made in the 2006 to 2009 timeline that are not present on your 2004.

A suggestion about the wheel torque. It might help to adjust the shift rod trunion into a little faster orientation in the first forward speed (the owners manual shows you how to do this). The farther the friction disk is from the center of the drive plate, the more efficient it will be (more drive torque). Your reverse speeds may slow as a result however....

samdog: No noise. When I had the bottom cover off, the belt, pulleys, idler, friction disc, and drive plate were all clean and dry. We have some snow in the forecast for tomorrow, so I'll see if it's going to be a problem.
Snowmann:Thanks for the (non) interchangeability info. I had seen you mention in one of your previous posts the major improvements in 2005 or 2006. How can you tell when a friction disc should be replaced? I've noticed they're not terribly expensive.

Followup: A new friction disc (it was worn more than I had guessed) and some elbow grease with a Scotch Brite pad on the drive plate has eliminated all slippage.