Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Original Message Jan 24, 2010 1:00 pm |
|
Hi! Does anyone now if this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS? I am not sure if this kit will fit because it is a new model for 2009 and i think older huskys used the Tecumseh engine and mine has a 15.5 B&S Snow Max. Do they have same drivshaft dimensions so same pulley`s can be used on both engines. Or is it other reasons why this won`t work? I think this kit will give me the same performance as the PRO series huskys that have HIGH SPEED IMPELLER? The only difference i`ve found in the 15530SB-LS and 16530SB-XLS part`s is the impeller pulley and impeller belt. Am i far of? Philip
This message was modified Jan 24, 2010 by Geronimo332
|
snowmachine
Location: Washington State
Joined: Nov 12, 2008
Points: 268
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #6 Jan 28, 2010 3:24 pm |
|
• I put wire looming in there for some moisture intrusion as well as abrasion. A lot cheaper to replace the looming than the cabling. Although it is under warranty I was looking at the long term. • I got the Poly slide shoes off of Amazonhttp://www.amazon.com/Arnold-490-241-0010-Universal-Slide-Throwers/dp/B002MRM6KQ/ref=sr_1_1?ie=UTF8&s=hi&qid=1264710149&sr=8-1 • I'm still thinking about the auger weight kit. I think mine could use a little more weight in the front.
This message was modified Jan 28, 2010 by snowmachine
HTTPs://ouppes.com
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #8 Jan 28, 2010 5:11 pm |
|
I read somewhere on the internet, one guy who was thinking about installing two auger weights on top of eachother. Just getting longer bolts. c,")
|
snowmachine
Location: Washington State
Joined: Nov 12, 2008
Points: 268
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #9 Jan 28, 2010 6:01 pm |
|
Nice mods.Ater you get that clarence impeller kit and high speed impeller on,let us know how much of an impact it had on snow throwing distance.Hey some people r car crazy,u r snowblower crazy lol....nice work. Thanks! I will report back on distance.... I think that is going to be quite noticeable. I thought about adding on heated hand grips but I'd have to modify the electrical on the motor..... Maybe next year :-)
HTTPs://ouppes.com
|
snowmachine
Location: Washington State
Joined: Nov 12, 2008
Points: 268
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #10 Jan 28, 2010 6:06 pm |
|
I read somewhere on the internet, one guy who was thinking about installing two auger weights on top of eachother. Just getting longer bolts. c,") I wonder how much weight each bar adds? Is your intake 30 inches wide as well? http://www.mowpart.com/OEM-Parts-AYP/c1337_1292/p361659/Kit.Weight.30.Snow.A/product_info.html
HTTPs://ouppes.com
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #12 Jan 30, 2010 4:36 pm |
|
Got my impeller pulley and belt today. Had to order the parts for the Husqvarna 16530SB-XLS that has "high speed impeller " as standard, since Jack`s Small Engines didt have the Hi performance kit in stock. So i just ordered the parts from a shop here in Norway.
This message was modified Jan 30, 2010 by Geronimo332
|
snowmachine
Location: Washington State
Joined: Nov 12, 2008
Points: 268
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #13 Jan 30, 2010 5:06 pm |
|
Got my impeller pulley and belt today. Had to order the parts for the Husqvarna 16530SB-XLS that has "high speed impeller " as standard, since Jack`s Small Engines didt have the Hi performance kit in stock. So i just ordered the parts from a shop here in Norway.
I didn't realize you were in Norway. Cool! You are probably going to have kit on yours before I am. :-) I am curious if dimensions are the same on you kit. Here are rough specs on mine: Belt Diameter: 5/8 inch / 1.5875 centimeters Pulley Diameter: ~3.622 inches / 9.2 centimeters
HTTPs://ouppes.com
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #14 Jan 30, 2010 5:41 pm |
|
The Pulley Diameter on mine is 89mm. Part # 532 42 64-92 I still have to wait 3-4weeks before i get my snow thrower. I ordered mine from Amazon for $1283 with free super saver shipping. It`s now on a boat over the Atlantic on its way to Europe and Norway. The snow thrower will cost me about $1950 total with norwegian tax and for the shipping over the Atlantic. But`s that`s cheep, as almost the same Husqvarna model ( same spec) here in Norway called ST276EP cost $3900. No kidding! Is that crazy or what? The local dealer got a shock when i told him the reason for why i ordered the parts(impeller belt/pulley), since the norwegian ST276EP have hi speed impeller standard. "Have you ordered a husqvarna snow thrower from USA" shaking his head like he tought i was crazy. That was untill i told him i got it delivered at my door for $1950. He mumbeled something about him not even getting it for so low cost into his store from Husqvarna Norway.
This message was modified Jan 30, 2010 by Geronimo332
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #15 Jan 30, 2010 5:59 pm |
|
Notice "NO HQV" on the impeller pulley plastic bag, stands for Norwegian Husqvarna. Still made in USA. (bottom left, under the barcode) REMHJUL stands for Belt Pulley Parts waiting to get installed (hour timer and Clarence`s impeller kit)
This message was modified Jan 30, 2010 by Geronimo332
|
|
|