Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Geronimo332


Joined: Jan 24, 2010
Points: 16

Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Original Message   Jan 24, 2010 1:00 pm
Hi!

Does anyone now if this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?  I am not sure if this kit will fit because it is a new model for 2009 and i think older huskys used the Tecumseh engine and mine has a 15.5 B&S Snow Max. Do they have same drivshaft dimensions so same pulley`s can be used on both engines. Or is it other reasons why this won`t work? I think this kit will give me the same performance as the PRO series huskys that have HIGH SPEED IMPELLER? The only difference i`ve found in the 15530SB-LS and 16530SB-XLS part`s is the impeller pulley and impeller belt. Am i far of?

Philip

This message was modified Jan 24, 2010 by Geronimo332
Replies: 1 - 10 of 36NextNext page of topicsAllView as Outline
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #1   Jan 24, 2010 4:21 pm
I'm not 100% certain but I do plan to install this same kit on my Husky clone probably next weekend.  My Craftsman has standard B&S 14.5 Snow series "non-max" engine.

All my research would tend to say this kit will work for you.  I got this kit for $30 off of eBay.  This replacement pulley is 3.75 inches in diameter




This message was modified Jan 24, 2010 by snowmachine


HTTPs://ouppes.com
Geronimo332


Joined: Jan 24, 2010
Points: 16

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #2   Jan 25, 2010 2:51 pm
Thank`s Snowmachine!

I think your right, so i just ordered the kit from Jacks Small Engines.  I could not find it on Ebay so i had to pay $66 for it.

I also ordered the Snowblower Impeller Kit from Clarence`s. Can`t wait to modify my Husky!

This message was modified Jan 25, 2010 by Geronimo332
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #3   Jan 25, 2010 5:27 pm
I got the deal I did through some liquidator who was probably clearing out inventory of some unfortunate dealer who wasn't able to make it in the current economy. I am going to put the Clarence kit on mine as well. Geronimo332 wrote:
Thank`s Snowmachine!

I think your right, so i just ordered the kit from Jacks Small Engines.  I could not find it on Ebay so i had to pay $66 for it.

I also ordered the Snowblower Impeller Kit from Clarence`s. Can`t wait to modify my Husky!



HTTPs://ouppes.com
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #4   Jan 28, 2010 2:25 pm
Geronimo332 wrote:
Thank`s Snowmachine!

I think your right, so i just ordered the kit from Jacks Small Engines.  I could not find it on Ebay so i had to pay $66 for it.

I also ordered the Snowblower Impeller Kit from Clarence`s. Can`t wait to modify my Husky!


My past mods have been as follows:

Past Mods:

-Hour meter/tach


-Wire looming cabling


-Auger bearings



-Retainer clips added to drift cutter thumb screws (prevent loss)


-Poly skid shoes


Here is my pending mod list:

-Husqvarna High Speed Impeller Kit (larger auger pulley & wider diameter belt)
(Pictures above)

-Clarence Impeller Kit


-B&S fuel shutoff valve (mine didn't come with one but easy to add)

-Chute deflector extension (you may already have this on yours)


HTTPs://ouppes.com
Geronimo332


Joined: Jan 24, 2010
Points: 16

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #5   Jan 28, 2010 3:08 pm
Wow, snowmachine!

You are sure dedicated!

Thanks a lot! Some nice mods there. Im sure gonna copy some of them.

-I already got the hour meter/tach, just ned installing.

-Wire looming cabling, is that to prevent snow and moisture? Sure looks sweet. I might add that mod as well.

-Auger bearings, (original equipment)

-Retainer clips added to drift cutter thumb screws, that mod is in the plans.

-Poly skid shoes. Looks damn good! Where did you buy them?

-Husqvarna High Speed Impeller Kit  and the Clarence Impeller Kit  is in the mail.

-B&S fuel shutoff valve, was alredy installed on mine. Nice to have for safety when not in use. In case of carburator overflow!

-Chute deflector extension (you may already have this on yours), yes this was standard.

- I am thinking about the Auger Weight kit as well, what do you think about that?


snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #6   Jan 28, 2010 3:24 pm
• I put wire looming in there for some moisture intrusion as well as abrasion.  A lot cheaper to replace the looming than the cabling.
Although it is under warranty I was looking at the long term.

• I got the Poly slide shoes off of Amazon
http://www.amazon.com/Arnold-490-241-0010-Universal-Slide-Throwers/dp/B002MRM6KQ/ref=sr_1_1?ie=UTF8&s=hi&qid=1264710149&sr=8-1

• I'm still thinking about the auger weight kit.  I think mine could use a little more weight in the front.
This message was modified Jan 28, 2010 by snowmachine


HTTPs://ouppes.com
mikiewest


Joined: Dec 29, 2007
Points: 262

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #7   Jan 28, 2010 3:45 pm
Nice mods.Ater you get that  clarence impeller kit  and high speed impeller on,let us know how much of an impact it had on snow throwing distance.Hey some people r car crazy,u r snowblower crazy lol....nice work.
Geronimo332


Joined: Jan 24, 2010
Points: 16

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #8   Jan 28, 2010 5:11 pm
I read somewhere on  the internet, one guy who was thinking about installing two auger weights on top of eachother. Just getting longer bolts. c,")
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #9   Jan 28, 2010 6:01 pm
mikiewest wrote:
Nice mods.Ater you get that  clarence impeller kit  and high speed impeller on,let us know how much of an impact it had on snow throwing distance.Hey some people r car crazy,u r snowblower crazy lol....nice work.

Thanks!

I will report back on distance.... I think that is going to be quite noticeable. 

I thought about adding on heated hand grips but I'd have to modify the electrical on the motor..... Maybe next year :-)

HTTPs://ouppes.com
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #10   Jan 28, 2010 6:06 pm
Geronimo332 wrote:
I read somewhere on  the internet, one guy who was thinking about installing two auger weights on top of eachother. Just getting longer bolts. c,")

I wonder how much weight each bar adds?  Is your intake 30 inches wide as well?

http://www.mowpart.com/OEM-Parts-AYP/c1337_1292/p361659/Kit.Weight.30.Snow.A/product_info.html

HTTPs://ouppes.com
Replies: 1 - 10 of 36NextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42