Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hi!

Does anyone now if this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?  I am not sure if this kit will fit because it is a new model for 2009 and i think older huskys used the Tecumseh engine and mine has a 15.5 B&S Snow Max. Do they have same drivshaft dimensions so same pulley`s can be used on both engines. Or is it other reasons why this won`t work? I think this kit will give me the same performance as the PRO series huskys that have HIGH SPEED IMPELLER? The only difference i`ve found in the 15530SB-LS and 16530SB-XLS part`s is the impeller pulley and impeller belt. Am i far of?

Philip

Shryp wrote:
Textbook example of "do as I say, not as I do" 

Gotta love the 2 cycle oil mixing tip by color.  I guess it's too hard to read mixing table.

Thanks Guys...I hate guys like that! I am waiting on a new belt to come in and I measured the old one which was tight, 37&1/4" so I ordered a 5L390W which is a 5LK390 heavy duty to try which should be 1 3/4" longer to see if it fits OK. I may have to go to a 40" (5L400W) but it's only less then $20 so I'll give it a try. Would be nice to know what the belt for the kit is suppose to be but Oh well, trial and error. I'll figure it out!

I'll see if I can pull a part number off the belt tomorrow. After mid January the snow season turned barren here so haven't used the blower in over a month. wolverine wrote:

Unfortunately part number is distorted enough on belt I can't make it out.

I am just guessing here as I have never done it myself, but I wonder if a little math would work.

Diameter of large pulley x 3.14 = circumference of large pulley.
Diameter of small pulley x 3.14 = circumference of small pulley.

Half of the large number - half of the small number should give you the extra length needed, than add that to the original length.

It might not be perfect, but it might give you an idea.

Boy oh boy no room to  voice an option here, we must be in some 3^rd world country ruler by a very smart dictator Sorry.   Let’s all go and increase the engine pulley size and yes lets all go and drill holes in the impeller and add some silly  rubber pieces and while we are add it why not add larger wheels that will make the snowblower go faster.  Now let’s see what else the engineers screw-up so we can correct.  Just my opinion

edgenet wrote:
Plastic chute liner would be nice on machines with metal chutes.   A little self contained air compressor to blow the snow off of the machine after working would be sweet. 

Peformance performance stop!!!! snowblowers are made to clear the snow from the driveway, this is not a throwing contest!!!! Security is the word that you guys are missing here, it's important to have a clearance between impeller and housing because any object enterring there would make the auger stall and break the shear bolt, otherwise with impeller kit it would be thrown away and hit someone in the face come on guys be serious a bit :)

Just installed the new belt from Napa. Original belt was 37 1/4" long and to accomadate the larger pulley went with a 39" belt so a 5L390W works well. Now just need the part #'s for the larger pulley/belt cover and bearings for the auger....