Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Geronimo332
Joined: Jan 24, 2010
Points: 16
|
|
Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Original Message Jan 24, 2010 1:00 pm |
|
Hi! Does anyone now if this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS? I am not sure if this kit will fit because it is a new model for 2009 and i think older huskys used the Tecumseh engine and mine has a 15.5 B&S Snow Max. Do they have same drivshaft dimensions so same pulley`s can be used on both engines. Or is it other reasons why this won`t work? I think this kit will give me the same performance as the PRO series huskys that have HIGH SPEED IMPELLER? The only difference i`ve found in the 15530SB-LS and 16530SB-XLS part`s is the impeller pulley and impeller belt. Am i far of? Philip
This message was modified Jan 24, 2010 by Geronimo332
|
wolverine
Joined: Feb 19, 2011
Points: 5
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #29 Feb 20, 2011 6:29 pm |
|
Thanks Guys...I hate guys like that! I am waiting on a new belt to come in and I measured the old one which was tight, 37&1/4" so I ordered a 5L390W which is a 5LK390 heavy duty to try which should be 1 3/4" longer to see if it fits OK. I may have to go to a 40" (5L400W) but it's only less then $20 so I'll give it a try. Would be nice to know what the belt for the kit is suppose to be but Oh well, trial and error. I'll figure it out!
|
wolverine
Joined: Feb 19, 2011
Points: 5
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
Reply #36 Mar 23, 2011 6:23 am |
|
Just installed the new belt from Napa. Original belt was 37 1/4" long and to accomadate the larger pulley went with a 39" belt so a 5L390W works well. Now just need the part #'s for the larger pulley/belt cover and bearings for the auger....
|
|
|