Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > how hot should ariens hand warmers be? and deflector ajustment.
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
solara
Location: Boston
Joined: Jun 16, 2004
Points: 252
![]()
|
 |
how hot should ariens hand warmers be? and deflector ajustment.
Original Message Jan 23, 2005 5:59 pm |
|
With the hand warmer,,,,,,,,how hot are the handlebars supposed to get. is it just slight? If it is more than slight is it possible that a wire is loose? wouldnt have chosed the option but if it is ther it should work as intended. 2) the deflector keeps popping up. i have tighrned the nut below the panel many times. scared of overtightening? should i just keep on tightening?? thanx
2004-2005 Ariens 11528LE
Jacobsen snow-burst
|
AJace
I have an Ariens 926 Pro because I like Orange
Location: Near Gettysburg
Joined:
Points: 969
![]()
|
 |
Re: how hot should ariens hand warmers be? and deflector ajustment.
Reply #3 Jan 23, 2005 6:28 pm |
|
After you are through tightening the nut, the lever should be fairly tight to move. That is how mine is. Next, you might want to look at the cable adjustment for the deflector. Tell us how it goes.
This message was modified Jan 23, 2005 by AJace
Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;
|
solara
Location: Boston
Joined: Jun 16, 2004
Points: 252
![]()
|
|
|
Re: how hot should ariens hand warmers be? and deflector ajustment.
Reply #4 Jan 23, 2005 6:31 pm |
|
a)t he deflector is a remote. there are inkage adjustments and`the nut under he controls thst i have tightened. as to the hand warmers i took off my glove. the ruber handle bar grips felt just slightly less cold than the frame. the machine had been running for quite some time.
2004-2005 Ariens 11528LE
Jacobsen snow-burst
|
Dave___in___CT
Deliberate often...
...decide once...
Location: West-Central Connecticut
Joined: Sep 17, 2002
Points: 3159
![]()
|
|
|
Re: how hot should ariens hand warmers be? and deflector ajustment.
Reply #6 Jan 23, 2005 6:34 pm |
|
Remote... OK... Is the any hardware on the chte's joint than can be tightened ? If so... maybe try adjusting there... ...or follow the Owner's manual... Was this a light or heavy snow when this happened... ? If a light snow... then there's a problem... Dave...
Whether you think you can or you can't... you're right.Henry Ford  BCS Tractor & snowblower
|
|
|
