Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

Easy SteerŪ drive system giving continuous power to both wheels and auto speed adjustment

Is it similar to the Ariens auto differential? 

I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

Rick

Finally a dealer who knows about the updates for the 1130 SE.

Both updates are warranty issues.

A) Water Seal Kit or waterproof kit retro kit, Part number (in CAN) assuming its the same US, BS 1687300 (SM) The kit came out in Jan of this year.

B) Clutch lever kit update for slippage.....BS 1687452YP (again CAN number) Hope it the same US. This update came out late spring.

I just placed a call to my JD dealer and will speak to him soon, I hope.

Just called the dealer spoke with a different guy who I should of spoke the first time and he said drop it off and well take care of it. He was not aware of the later clutch lever kit fix and said he would get it done.

He said we have been selling these things for 25 years and that they have had had snow leaking in the parts......Kinda like why fix something that is not broken answer. I told him that Its better to have the updates installed NOW before it snows.

I think they hate it when you know more than you do.....
Knowledge is power.....

I talked to my dealer today.  My 1130SE should be here mid to late next week.  My neighbors will be wondering why I'm driving it around with no snow.  I can't wait to try it out!

BTW, have you seen this video?  http://www.youtube.com/watch?v=s3CCOUHb3Jo

Catt wrote:

The 1130SE "ROCKS" I am getting excited for winter.

A little more info on the problems with the 08 model. The problem is they use to use the Tecumseh motor that was flat on the side where the belt cover was. They dont make a snow blower engines any more. So, the BS engine is not flat on the side where the belt cover goes and this has caused problems with snow leaking on the belts. 

Does anyone know what this clutch lever update is? is it worth nagging my dealer about it?

I finally received my 1130 SE...  I went through it with a fine tooth comb to make sure everything was adjusted properly because it wasn't when I got it home.  I thought the dealer should have done a much better job.  After getting everything greased, oiled and adjusted I drove it around the driveway.  This seems like a fantastic snow blower and I can't wait to try it out this winter.  The electric chute works great and the hand warmers will be very nice.  I haven't fully decided about a cab just yet.

As I was going through everything, I removed the lower metal chain case cover.  Now I can see why the earlier version was slipping when it got snow between the engine and the plastic belt cover.   It's a very short direct path to the aluminum disc.  I mean it sits right below the plastic belt cover and there really isn't any where else the melted snow can go. In addition, when you engage the wheels, the aluminum disc tilts slightly giving it even more of a direct path to become wet.. Another thing I noticed was the minimal lube on everything including the chains.  I guess they are now trying to make sure that lube doesn't get splattered onto the disc.  This was all different than my 25 year old Simplicity pro series.  My old Simplicity disc was in a different location and everything was lubed to the max.  The Simplicity disc also didn't tilt for engagement.  But I think the JD is better because the axle is much further back giving more downward force up front.  This should cause the front end to dig down more.  But in the end, I would definately get the updates for the belt cover if I had last year's model.

While apart I looked at the "easy steer" differential.  This thing is pretty slick.  If you rotate one tire and hold the other stationary it will turn the shafts and chains.  It doesn't matter which wheel you rotate and hold stationary, you will get the same result.  so it works exactly like an automotive differential and must be planetary gears of some sort.  I believe the differential can semi lock and unlock too depending on wheel load versus drive torque.  In other words when the wheels are pushing hard they will lock together, although I'm not sure how to fully test it and how much they lock.  I did notice how the wheels seem to lock when I drove it down the trailer ramp.  Either way it looks like a very good feature to me and is probably one of the main reasons to buy this snow blower.

Catt, congrats on your JD, glad you like what ya got.

Got both of the updates done at the dealer this week. I almost $#%* when the girl said $197..... I said, but this was warranty work. She said I will get the service guy. He confirmed it was warranty work updates with no charge. Didn't give me any paper work, said you don't need it.
Service guy asked if JD contacted me about updates? I said nope, got the info from a blower forum.
I could tell this pissed him off, then he said why did I get them done if I had not used the blower? I said would you get them done, I don't want this thing slipping around.
He said out of all the JD blowers they sold last year not one came back with a slipping problem. I said last year we did not get alot of snow but maybe we will this year and I don't want to have to throw this thing in the back of my pickup. I want it to work with out a problem, that why they have the updates. He was like why fix something that was not broken.
I do not like doing business at the stealer, I mean dealers.

Hope every guy with a 2008 JD 1130 gets his updates. You deserve them, that right!
Jim

lanningjw, You did very well.  You got a great price and the updates.  It kind of pi_ _es me off how this has been handled.  Only people that b itch get the update.  This will be a problem eventually for anybody without the updates, but you won't know it until the right conditions occur.  I saw several machines at Lowe's without and the sales people had no clue.  Now I'm going to look forward to winter and I have a new toy to play with.  Good luck with your 1130.  I'm sure you'll have many years of great service and good job making sure you have the latest revisions.

Good morning, Ianningjw good for you, hopefully you won't have any problems now that you have had the updates done,  where did you find out about the clutch lever update? now that it has had the update, could you tell the difference from the original lever to the updated one?