Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

You need:A cordless screwdriver. A greenhouse attached. ;Pipe 1 1 / 2 inches. ;2 lid.;A metal rod. A bipolar switch. ;9-volt batteries. ;And some other small widgets. This work very well, and once work is completed, I returned my batteries inside.

WATCH VIDEO HERE

Why not use the rechargeable battery that came with the tool ?  I don't think those 9v batteries are going
to last very long with such a high current draw.   9v batteries are usually used in things like smoke
detectors which have just about no current draw.

pvrp wrote:
I was thinking of that too, but if Bolack can build  this electric deflector, why not go forwrd and add to blower a small alternator???

Bolack, is this your next step to your project??? I think it's a wiper motor....

Yep Denis next step with same screwdriver for rotation chute;My mount clamp was made with plastic 1/2 inch;To hold everything in the tube, i used little stud glued with black silicone on plexiglass fixed with small screws in the back. I sanded the screwdrivwer casing and the inside of the tude to slide it in and stick it with epoxy. The electric motor is 6 volts but with 9 volts it turns. After the job is done outside I disconnct the power back and bring it inside.

GtWtNorth wrote:
Thx vais faire pareil pour la rotation de la chute et cela va etre moin compliquer..

I guess you could use 3/8 ALL-THREAD (10mm, for you up north) for the drive worm and a standard nut...  

Friiy

friiy wrote:
Hello Friiy.
My first test was with this kind of screw.
But my deflector was not fast enough.

Great job, But I think it is a little slow. I think it would go better using a cable and lever.

A+ for effort but way too slow to be practicle.

Looks good to me, still faster than stopping snowblower and moving deflector by hand like 99% of us do. Great job.