Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > John Deere 1130 SE

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Clay


Location: Wis
Joined: Dec 3, 2008
Points: 111

John Deere 1130 SE
Original Message   Jan 7, 2009 1:07 pm
I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

  • Easy SteerŽ drive system giving continuous power to both wheels and auto speed adjustment
  • Is it similar to the Ariens auto differential? 

    I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

    Rick

    Replies: 206 - 215 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    lanningjw


    Location: MINNEAPOLIS, MINNESOTA
    Joined: Oct 8, 2009
    Points: 29

    Re: John Deere 1130 SE
    Reply #206   Dec 26, 2009 9:50 am
    Catt, Great post on keeping the water off the belt area. Your pictures are the best way to show the water problem. My 1130 did not slip after several hours of use on the big snow storm over Christmas. The weather strip that was put on per your fix did its job. This blower performed great. It was able to handle the wet snow  from the plow at the end of the driveway. I am amazed at how well it worked. I give it a "A" performance.

    Speaking of problems, I had one,  the metal strap that holds the resister on the generator has failed and fell of from the vibration. I think it then shorted out, saw some sparks and the light no longer works. I would think this would be a warrant issue, wouldnt you?

    This message was modified Dec 26, 2009 by lanningjw
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #207   Dec 26, 2009 10:33 am
    I think you are referring to the regulator that is strapped to the starter.  That should definitely be a warranty repair.  I'll look at the strap holding mine to the starter to make sure it's secure.
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #208   Dec 26, 2009 10:58 am
    lanningjw, you might want to check your light bulb.  The case of the regulator is grounded when strapped to the starter.  When that ground is lost the voltage will spike to much more than 12V and could have burned out the bulb.  Once it's grounded the voltage would be back to 12V provided the voltage regulator isn't damaged.  My guess is the regulator is still good and you only need a new bulb and new strap to hold it.
    This message was modified Dec 26, 2009 by Catt
    lanningjw


    Location: MINNEAPOLIS, MINNESOTA
    Joined: Oct 8, 2009
    Points: 29

    Re: John Deere 1130 SE
    Reply #209   Dec 26, 2009 11:25 am
    Catt wrote:
    lanningjw, you might want to check your light bulb.  The case of the regulator is grounded when strapped to the starter.  When that ground is lost the voltage will spike to much more than 12V and could have burned out the bulb.  Once it's grounded the voltage would be back to 12V provided the voltage regulator isn't damaged.  My guess is the regulator is still good and you only need a new bulb and new strap to hold it.



    Ok its a regulator that is attached with the metal strap that goes around the starter. Sorry, I had no idea what they were, glad you knew what I was talking about.  So, I'll go get the correct sized strap and a new bulb, then I will see the light!

    Your happy with the performance of the 1130?

    This message was modified Dec 26, 2009 by lanningjw
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #210   Dec 26, 2009 2:31 pm
    I'm very happy with my 1130 now.  It blows great and and it scrapes very well.  I actually look forward to more snow.
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #211   Dec 26, 2009 6:15 pm
    I had my headlight burn out on the 2nd time out.  I replaced it and my new headlight only lasted one use before it too burned out.  That's two burned out headlights in 4 times out.  I checked the voltage and it is 13.3 which isn't too high.  It may be from vibration.  I noticed that the headlight bracket is bolted right to the metal of the machine.  I will try putting a piece of rubber (piece of inner tube) between the bracket and the machine to try to reduce the vibration some. 

    Sean Woods
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #212   Dec 26, 2009 11:24 pm
    Swoods, It wood be interesting to see what the voltage is at different throttle settings.  I agree that 13.3V shouldn't be a problem.  If I get time, I will check my voltage.
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #213   Dec 26, 2009 11:25 pm
    lanningjw, Let us know how yours works after the new clamp and bulb.
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #214   Dec 26, 2009 11:34 pm
    Catt wrote:
    I'm very happy with my 1130 now.  It blows great and and it scrapes very well.  I actually look forward to more snow.

    lanningjw, I forgot to add that I find the easy steer feature fantastic.  The 1130 is a pretty big machine, but with easy steer it seems much smaller.
    lanningjw


    Location: MINNEAPOLIS, MINNESOTA
    Joined: Oct 8, 2009
    Points: 29

    Re: John Deere 1130 SE
    Reply #215   Dec 27, 2009 9:41 am
    The Easy steer really helped me to be more effective, because I can go down the middle of the drive way, and then do a 180 tight turn while staying under power and continue blowing snow.  

    The 1130 has a big powerful engine, the blower weights in at 250 lbs and seems to be able to dig down into the snow because of the balance of the wheels and the front end. I am happy and so are the folks that live around me.

    I did raise the skids with the paint stir stick, but it seems to be to high and leaves alot of snow on the driveway, any advise? 

    This message was modified Dec 27, 2009 by lanningjw
    Replies: 206 - 215 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
    AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
    Copyright 1998-2024 AbbysGuide.com. All rights reserved.
    Site by Take 42