Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment

Is it similar to the Ariens auto differential? 

I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

Rick

I too have the same problem with these 3 parts missing, and got the run around from John Deere earlier this year, and wanted to try to fix it properly.  So I bought the parts myself (shaft plate, seal and strip).  I installed them all, but now my cover doesn't fit correctly.  It is as if the new plate is a little too big for the cover.  So I set out to Lowes, to look at the new 928's to see what I could find out, and took these pics.  Pictures have explanations in them.  If anyone runs into the same issue with the cover fitment, please let me know how you fixed it!

I played with adjusting the cover some more, and was able to finally get it popped on correctly with some pressure.  It doesn't go on as smoothly as the new models @ Lowes, but it is on.  Hoping now that the water is properly deflected, I think the plate being in place will make all the difference...

Tomorrow morning I fire up the 1130 and start blowing snow for the first in it's life.  I can't wait to see how it performs.

Maybe the bolt holes on the belt cover need to be "reemed" out a bit to compensate for the seal plate that is now being fit in.  I ordered my parts and am just waiting for them to come in.

Has anyone had any luck with adding a cab?  I went out yesterday for the first time and had a bunch of snow blown back on my face :)  Great machine though! 

I added a cab to my last snowblower and I ordered a cab for my 1130 from ebay.  These are made specifically for the Deere.  Just be aware you have a headlight off to the side and some cabs won't work well with the light.  Another thing to look for is an easy way to remove the cab.  Some cabs bolt on with no easy way to remove it.  Do a search on ebay for Deere snow cab .

Classic Deluxe make an excellent product for a very good price. I have one and really appreciate it's convenience. It's very well built and has quick release. Here's a link...http://www.classicaccessories.com/product_detail.aspx?pid=112&cid=0

This is a better price than I received from eBay for a cab.

 

http://www.rungreen.com/search.asp?keyword=LP91967&www=Submit

Yo Catt: Does that cab have quick release capability. The Classic Deluxe is secured by two quick release pins.

Borat,  It's supposed to have quick release pins,  but I haven't received it yet.  It's also supposed to be made by Classic with a custom fit for the Deere.

Catt,  I just ordered the same cab from the Rungreen.com website that you mentioned.  I like that it has the pockets inside.   I had the headlight burn out already.  When I went to the store to get a new one, it turns out it is a foglight bulb. 

I just wish I had a bigger driveway now.  At least I can keep it in 1st gear to make the job last longer :)  I love mowing (with 2 cycle Lawn Boys), and this is the next best thing.