Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello All.

Here are my few complaints about my Ariens 1130DLE snow thrower. Over the last few weeks I have been getting my snowthrower ready for the years to come. After realizing how much it rusted in just one year, I figured it was best to start sooner then later.  I am super glad I started this now as some things haven't been easy. Like the removal of one rusted wheel to the axle. Anyway, won't rehash that here as its in the other post about it.

Here are my complaints. I really don't see why they should even be a issue with such a well built machine.  My first complaint is lack on anti seeze on integral components that should be easy to remove for maintenance.  Today I spent some time taking off the attachment pulleys (two bolted together for dual belts). I did this after reading how hard it could be to remove after a few years of operation. Things like gear pulleys, heat and hammering to remove it, seem to be common.  So why not anti seeze it?  Maybe they do, but after getting mine off today, certainly no indication it was done on mine. Granted mine wasn't that rusted and came off without much trouble, but it was rusting. Few more years and I am sure I would be in the same boat as the rest when it comes to tough removal.  So why not the few extra dollars to anti seeze these components?

My second complaint.  All the rakes that hold the bushings are screwed in with self tapping bolts. When you purchase the rake there is no thread in it, so you screw in the bolts which grab into the rake. I cannot understand why the rakes would not have threads? Why not a bolt with a nut on the end? Why is this a issue for me? Well I cannot seem to back out a bolt without snapping off the head. Then, I am stuck either purchasing another rake or trying to removing the broken bolts, which isn't easy.  I cannot understand why these rakes are not made so that they can come off easier with better bolt system. If somebody here has a trick on removing these self tapping bolts, please let me know. PB blaster does not seem to help at all. Just as a note, the rake is $9.95 and the bolts are $1.45 at my dealer. So with three bolts in each, it doesn't take much to need $15 in parts for just one rake.  With two on the auger, it will run me over $30 to get it out if I want to anit seeze it.  At least when I put it back together I can use bolts/nut. But would be nice if there was a thread in the rake.

That is it. These seem to be minor issues that ariens could easily rectify to make these machines easy to maintain. 

Cheers
Goofie Newfie

goofienewfie wrote:
Me too.  At least Ariens still appears to be the best of the best.  I find it hard to believe that no
one else offers models with a differential.  I couldn't imagine being without it.  I'm anxious to
see how the new limited slip one works, it'll be nice not to stick my nose into the exhaust pipe
everytime I want to lock the wheels.

It's too bad that the old farm implement philosophy of making things to last forever seems to
be quickly disappearing, if it's not already gone.  Now it's all about figuring out what is the
minimum required to generate X number of sales while providing the shortest lifespan the
customer will accept.  Maybe Ariens should open up a custom shop so we could specify the
features we wanted :-)  And pay for it.  For example, I would really like the most power for the
narrowest auger width.  My dream Ariens is a battery electric start 13hp 24" blower.



Do you have Canadian Tire in Newfoundland ?  Here's a grease they sell that would be ideal :

   http://www.canadiantire.ca/browse/product_detail.jsp?%3Eprd_id=845524443278235

Product data sheet from Shell :

http://www-static.shell.com/static/ca-en/downloads/shell_for_businesses/oils_lubricants/1-17.pdf



I meant that if you're used to applying a certain amount of torque tightening a screw or bolt
(after having broken a sufficient number of them to acquire a sort of torque-wrench-of-the-
wrist) applying grease will throw off your calibration and you have to tighten less than you're
used to or risk going too far.

Paul

Hi Paul;

Yes, that make total sense now about not over tighten the greased bolt. Thanks for explaining that for me.  That grease looks good, will have to pick up a tube on what now seems to be my daily visit to Canadian tire.  Just a note, you CT link did not work for me, but I found it when I searched their site.  Thanks

Picked up a tube of that grease today. Have to say thanks for the advice, what a great grease. Very silky between the fingers, feels like great quality.  Thanks!

pvrp wrote:

By reading the very frequent complaints about Ariens machines, I have to say "best of the best" is a considerable over statement.   In my opinion, they're in the top five of the best snow throwers.  However, I'd rate them in around fourth after Honda, Simplicity/Snapper/JD, Toro.   They're not the machines they used to be.

borat wrote:
I was expecting someone to bring Honda up, but not the others.  I haven't gotten
up close with all of them but from pictures and specs I don't see what would lower
Ariens with respect to the others, but then I'm only referring to their Pro models and
how they compare with the top models of the other companies.   It looks to me that
solidity-wise the Ariens is at least the equal of the others, if not more so, but the big
thing that puts Ariens way ahead of the others is the differential.

As for Honda...  I have to admit that to me the idea of Honda making a snowblower
in the first place is kind of a strange idea and their implementation of it reflects this. 
It's like using a GoldWing to plow a field.  In my mind a snowblower should be more
like an old tractor, few parts (inexpensive to replace) and everything built so that it
could be left for a few years at the end of a field but then be put back in service with
little effort.  Big lumbering heavy parts, the very opposite of spiffy Japanese mechanics.
Something you can work on yourself without needing thousands of dollars of special
tools.  Honda's front end has never impressed me either, too light and somehow
doesn't look quite right (and they only recently fixed their weird skid shoes, or lack
thereof).

Cars are a different matter, I drive Japanese, but for snowblowing I'd rather have a
Harley :-)  I get a kick out of starting my 10hp Tecumseh flathead.  Chug, chug, chug,
sputter, chug, chug, chug.  What vibration, what noise !   But after ten years it's still
like the day I bought it and will probably be the same in another ten, or twenty.

Then there's the price of parts.  I have this Honda four-stroke brush cutter.  I wanted
to buy another head so I could switch from a blade to a string with a single screw
instead of having to spend a bunch of time dismantling and reassembling things to
switch from one to the other.  The price for a second head (minus the guards,spool
and so on) was almost the price of the entire machine. Imagine the price for parts
and repair to Honda's hydrostatic drive.

I have a 1995 Case 1845C skidsteer loader which is also built the American way,
every part is overly robust and its four-cylinder C-u-mmins [this software won't let
me put those three letters together] diesel always starts like a car when I fire it up,
even in winter.  All parts are readily available and cheap.  Just like Ariens.  By the
way this machine, with chains, is a real snowmover (though I bought it for
landscaping).   I've noticed that skidsteer loaders have also gone the route of
decreasing robustness and increased complexity.  Too bad.

To you Honda owners, I'm not trying to pick a fight :-)  I seriously considered buying
one this year but the fact that they won't turn on a dime was the main fault since it
will be used to clear a lengthy wheelchair ramp with u-turns and a tracked machine
would have been a pain (now if their tracks could be operated like the wheels of my
loader, which can spin on itself, it would be a different matter). I may still buy one
oneday (in another life I was a Honda motorcycle mechanic) but if I do it will be more
like buying a motorcycle or sporstcar,  for the fun of babying it  and working on it in my 
garage to keep it shiny new.  While the Ariens spends the night in the doghouse.

Paul

goofienewfie wrote:

I'm thinking that maybe you could contact Ariens via their web site and give them your feedback in precise terms.  Maybe they will take the advice to make some changes in these areas you've mentioned.  Certainly the bolts could come with nuts if they wanted to manufacture the parts in question that way.  I think it would be a good idea.  It's also a good idea about treating the parts to prevent rust.  If you contact them, please let us know what Ariens' response is.  That would be very helpful. 

  this is how  the companies make there money....  im surprised no one on this forum has mentioned it in the past.  when you purchase a new machine " disassemble" and anti-seize stuff.  my small engine teacher here in minnesota worked for the polaris dealer and the upper people told him this exactly,  that this is how the make they money is selling parts later.    take briggs and stratton..... right now we are sellin g a 5hp vertical mower engine for $139.00.   2 yrs down the road from proper maintenance, i will sell him a new $40.00 carb plus gaskets and such.   get the point.   

mech12 wrote:

Yep! same thing everywhere and most in China. I always make my wife smile about China, when I go to Walmart to buy something to hang on the wall they always come with screws....yeah screws chineese screws, if you miss your first shot they strip right away, that's how thing are made now, zinc plated sounds good but you know what is really zinc? it's crappy steel :)))))))))))))  So to get competitive to asiatic we now north american made our stuff like them what a mess, we are far from the tough steel 1959 ford truck

Hi all;

My complaints here are relativily minor. But, none the less unexpected for the price paid for this machine. In any case it is fixable, just with some work and money involved. My case being that for  just a few more dollars and a tad bit more time, these would not have to be address by any owner for a few years and that is what most expect with this type of machine. Has this ruin my Ariens experience? No. I suspect that what I have done to this machine would have been needed on almost all machines. Borat, in a post to me you explained you had to anti seize your wheels, as for the pulleys you didn't mention. I am currious to know why you ranking system? What makes your machine and torro better then ariens?  I won't mention the honda, as I too believe this to be number one.  The main differences I know of the simplicity/snapper/JD are the briggs engine and the cast iron gear case. But what else? The Toro is aluminum.  This brings me to another question, what is the makes the cast iron so good? I know its heavy are probably last longer, unsure if age of it lasting will make a difference in the end as I think the heavy aluminum one on mine will withlast fairly well. The Pro's have a cast iron, but my is just slightly less then a pro model. But isn't what makes a good gear is the gears inside and not so much the case? Why all the talk about the cover? I am thinking it would be better if we could compare the gears inside. Maybe the cover does make a difference, I am new to all this.

The negatives to me right now for ariens are the tecumseh engine and the minor issues I posted about in the beginning of this thread. Other then that I have no issues.  As for the tecumseh, well most here tell me it will last a long time with proper care, this including yourself. So that doesn't seem to be much of a issue. I am guessing Ariens will be moving on to Briggs in the future, so that sort of  crosses that off for the future, at least I hope.

But there are some pros on the ariens that your simplicity doesn't have. For example, the differential.  I think this is amazing and truly enjoyed this feature last year. The simplity has wheel trigger and I believe on one side at that. I think that is less then superior to the differential.  Second I am unsure of, but does the simplicity have a dual belt drive system for the impeller and auger? I think this is a great feature as well. 

I think there are pros and cons to every machine, I think the ranking of the top 5 may change depending on ones needs. I am not sure if its clear cut as to what manufacture is in which place.  I have never used or even seen a simplicity/snapper/jd.  Last year Jd didn't have snow throwers. Simplicity or snapper is not sold in my area. So I cannot even really judge them in any way. I have seen and used Toro and I can honestly say I feel my ariens is better for my purposes then a toro.  Toro was more expensive as well when I was pricing comparable machines last year before I purchased this unit.

I am sure the ranking of the top five could be debatable for a long time and maybe it would certainly change depending on each persons needs.  But I would like to know the things I have listed here as to why you put them in that order for yourself.

As for the original topic, I would love to see Arien's address the issues I listed and maybe I will forward this off to their customer service. If I get a response I will be sure to let you know.

I didn't want to start a pis* fight over which snow thrower is best.  My point was that  from what I've read lately,  in my opinion, Ariens is not  "best of the best".   I came to my conclusions by doing a cursory count of the number of complaints about Ariens vs. the others.  If you do the same, you'll see that the ratio of complaints is very much biased toward Ariens machines.  I'm certain that the argument will be made that Ariens is the number one seller of snow throwers.  Therefore the higher number of complaints.   That may have some impact on the weighting but I doubt very much that the numbers would be sufficient to balance the complaints bias.  I will make one concession though and that is since Ariens & Toro began selling their lower end products in the box stores, it is very much possible that some of their problems are a result of poor assembly. 

My rating of Ariens is based on my observations of words associated with complaints, used in conjunction with the word Ariens.   Not scientific I know.  However, I've been around long enough to see a trend developing.