Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello everyone, lots of good info here, but I need some help before having to go to the dealer.
I got a donated 5/24 Mastercraft MTD two stage that looked like it was used on some big chunks of ice. Auger, impeller & the front housing pretty bent up (of course there were the obligatory mild steel replacement "shear pins") but the motor still seems strong. So, after splitting the auger housing from the main chassis, and carefully disassembling & laying out the parts of the  auger brake and tensioner pulley on the work bench for easy reassembly, my son re-arranged the parts. Now I'm having a problem getting it back together (should have taken a picture). I did get a pdf copy of the manual from MTD, but the page where these parts are shown is a little faint.

So I'm hoping that someone out there has a clearer copy of the manual or maybe a picture of a machine split with all the parts in place?
Thanks

Model # 318550515   S/N 380785 A  

with a Tecumseh 5HP HS50-67256G   S/N 7175B

Hi. I added the model & S/N to the bottom of my original message. Anybody have any suggestions ?
Thanks

When you edited your post the board did not reflect that there was a change so untill you posted again I didn't know that you had added the model numbers. here is a drawing of your model I'll keep looking for a better picture.

AJ,  You can stop looking, that was exactly what I needed. Thank you very much. Now I just need to find the two shoulder bolts #29 that seem to have disappeared.
Oh well, at least I'm going forward, and none too late since we had our first dusting last night.

Cheers