Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Which snowthrower has the best snow throwing distance be it wet,2 inches or 5 inches??need to toss the snow long distances....

coasteray wrote:
Thanks coastery. 

borat wrote:
lol... I have to say, this is one of the first post on here that made me laugh.  Mostly because its so true.  If blowing in the wind, if the deflector is not low, then expect your face to freeze.  Even with the deflector low some times it can be tricky.   Borat I seen in your pictures that you have a snow cab on your machine. How do you find that? Approximately how high does it make your machine? wondering how much problems it would create for me coming in and out of shed and how much I would have to tip it back to do so. 

goofienewfie wrote:

Did you ever get that stubborn wheel off? 

My snow cab might be around 6'6" at the top.  It's a quick release model and comes off the machine easily.  I put an eye bolt in the top center of the frame and I have a small overhead pully on the ceiling in my garage that I use to store the unit during the summer.  The ceiling is aroun 11 feet or so and with the cab hiked up to the top, I can walk under it with no problems.  As far as effectiveness, all I can say is that it works.  It has to be a bad day before I'll use it though.  I prefer to work without it.  Usually I'll go out and start clearing the snow.  After a few freezing face melts, I smarten up and put the cab on.  It seems that I have to take some punishment  before I start thinking straight.   The unit I have is top notch.  It's made by Classic.  I ordered it from the U.S. for $89.00 late last year.   Tried to buy it locally.  Dealer said he could order one in for me at a cost of $250.00.  NOT!  Wicked gouger.  Here's a link:  http://www.classicaccessories.com/product_detail.aspx?pid=112&cid=0

borat wrote:

Borat

Yeah! the best citation I've ever heard about snow. Borat you touch the point very clearly, wind, snow, ice, those are incontrolable, 

We can choose the snowblower we want but we do not choose the kind of snow that is going to fall!!

borat wrote:
No unfortunately I have not. Still working on that one, another idea has arise in that post.

6'6" seems reasonably I believe I can handle that in and out my shed door. Storing it would not be a problem for me as I have a barn style shed, so I could put that up top and it would not be in the way. I like that fact that your model can be easily removed, I will definately be looking for that feature.  The model on the website looks more refined then the one that everybody shows as selling for that model.  The model on the manufacture site even has a place for my tv remote.. lol.. I mean garage. Not that I would ever use that, I don't have anything I can think of that I would need those pockets. But I do like the aerodynamics of the newer one, thinking the snow would run off the top better.  I have search some sites for the deluxe and cheapest I have found so far is $109.99  Think that is reasonably for that, and may order it. Have sent a e-mail asking if its the newer look model or still the square type design.  No chance of me buying locally, after all I cannot even get a simplicity here. ;)   Actually I am sure I could find somebody willing to gouge me to, but they probably be doing the same as me, ordering it online.   I love the internet for things like that, makes the world much smaller place.

Thanks for the link and the model, I believe I will probably end up with the same unit.

Cheers
Goofie Newfie

Compared to everything else I saw, the Classic is the best I could find and for less than ninety bucks, it was a bargain.  Be prepared for a little angst putting it on the machine.  It comes with a hell of a lot of brackets that might seem a little overwhelming until you realized that there are three sizes of brackets to match the required diameter of the tubing you'll be mounting it to.   Being a universal product designed to fit different machines,  and machines having different size tubing necessitate so many brackets.  So in reality, you'll be left with two sets of brackets after the install.  It does take some time and a bit of trial and error.  I found with mine that I had to relocate the light and cut a slit in the bottom of the canopy to allow it to fit down over the control rod turns the chute.  No big deal.  Just a bit of tailoring.