Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > 1987 Toro 521 Belt Adjustment ?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

Racerx71

Joined: Dec 6, 2007
Points: 12

1987 Toro 521 Belt Adjustment ?
Original Message Oct 1, 2008 2:09 pm

I just replaced both Belts on a toro 521. Is the finger ( Bar) that sitts to the side of the Pully off the Engine for both belts just a Guard ? Or is it supposed to keep tension on the Belt Or Belts?

Replies: 1 - 4 of 4

View as Outline

pare_john

Joined: Nov 4, 2007
Points: 31

Re: 1987 Toro 521 Belt Adjustment ?
Reply #1 Oct 1, 2008 10:27 pm

it is just a guard

Racerx71

Joined: Dec 6, 2007
Points: 12

Re: 1987 Toro 521 Belt Adjustment ?
Reply #2 Oct 2, 2008 9:50 am

So The Belt should not touch the Guard at all ?

JohnnyBoyUpNorth

Location: New Brunswick Canada
Joined: Dec 30, 2007
Points: 72

Re: 1987 Toro 521 Belt Adjustment ?
Reply #3 Oct 2, 2008 8:55 pm

On my machine, there are two "fingers" that are on opposite sides of the top pulley. I believe their function is to keep the belt from contacting the pulley when the tension is off. When the tensioner is in the "off" position, the belt goes slack, and the two fingers keep the belt from wearing on the spinning pulley.

Contents under pressure....

niper99

Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: 1987 Toro 521 Belt Adjustment ?
Reply #4 Oct 2, 2008 11:20 pm

the finger keeps the belt from coming off the pulley when relaxed (auger disengaged) so no it doesnt keep tension on the belt.

Replies: 1 - 4 of 4

View as Outline