Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello,

A friend of mine has a Honda with a hydrostatic drive, and from what he explained to me, this enables you to change gears on your snowblower, without having to stop moving with the machine,
in order to change the gear, and then get that movement going again by pressing down on the gear lever ( on your right handle bar )

Does anyone know if the Ariens brand of snow blowers use this hydraulics system for gearing ?

I'm looking at the model: http://www.ariens.com/products_snow/s_deluxe_1130dle_features.aspx

also, if anyone know where to find an online manual for any of the Ariens brand snow blowers I'd really appreciate any info

Thanks for any info.

snowmachine wrote:

Very nice pictorial essay.  Your cables are farther to the side than mine are.  My cables cross right over the top of the muffler.  I didn't have the small zip tie on those cable like you do either.  I did notice a couple of nice things that it looks like you did after you bought your machine.  One is the keeper wire on the engine start key.  I was wondering what I would do if I lost that thing.  I also noticed some white grease on the auger shaft.  Did it come greased or did you do some preventative maintenance on your new machine.  I also noticed some blue grease on one of the zerts in the photo. 

One of the hairpin hitchpin clips came out of the drive control connection and I thought that I broke a belt or a shear pin.  I was glad it was just a missing hairpin hitchpin.  I bought a package of 10 of them for $.99.  I have the service rep coming to the house tomorrow - Sat.  Your picture layout makes me think that I should document my machine as well.  I'll try to take some pictures before and after on the cable routing. 

Any ideas on what is the difference between the 917.881063 and the 917.881064?  For that matter what is the difference between the 60 and the 63.  I see that the 60 was advertised as having 8 speeds, 6 forward and 2 reverse and the 63 comes with variable speeds.  I wonder if the 64 changed the location of the cables slightly and they knew about this issue with the muffler.

Rick

   I do not think that Ariens offers a hydrostatic drive yet.    But hydrostatic  is available in the premium  Husqvarna   models , and also available in  2 Craftsman top of the line models, that are  are also built by Husqvarna  (ATP)   .. Hydro gear builds these transmissions.

   I do not think that Ariens offers a hydrostatic drive yet.    But hydrostatic  is available in the premium  Husqvarna   models , and also available in  2 Craftsman top of the line models, that are  are also built by Husqvarna  (ATP)   .. Hydro gear builds these transmissions.

royster wrote:

You do know this thread is 3 years old, right?

I have a Ariens 824le. No it does not have a Hydrostatic drive, however you can shift it in any gear except reverse with out stopping. No ariens snow blower has a hydroststic drive.