Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > problem with Ariens 520 tire - flat and can't get metal unit off

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Gabi


Joined: Jan 20, 2008
Points: 1

problem with Ariens 520 tire - flat and can't get metal unit off
Original Message   Jan 20, 2008 6:57 pm
I bought an Ariens 520 snowblower from Home Depot this year and have nothing but problems, mostly related to Home Depot's bad service. Originally, they gave me last year's model and the tire went flat when it was just sitting in the shed. Then I found out  you have to take the whole metal unit off to take it to a repair place to have the tubeless tire put back on. The bolt was easy to remove, but then a gold cap is supposed to be popped off, so you can pull the arm (leg?) off. But you can't because it fits snugly; nothing can be inserted to pry it out. When I complained, I was told to take the last year's model back and get this year's model. Stupid me. I just assumed the newer one would not go flat so easily, and if it did, it would not require this. Then today, only the second time I used it, the tire went flat while I was using the machine. Has anyone else had this problem? How do you get the cap off? Home Depot was useless today. I'm supposed to take the whole thing to a repair place, and I don't have a truck. I can't be putting a lot more energy into this; I had cancer last year, and I still tire easily. I like this unit when it runs. Nice and small, but does the job. Please, anyone, HELP!
Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
Snowmann


Joined: Dec 3, 2003
Points: 494

Re: problem with Ariens 520 tire - flat and can't get metal unit off
Reply #2   Jan 21, 2008 8:33 pm
Gabi wrote:
I bought an Ariens 520 snowblower from Home Depot this year and have nothing but problems, mostly related to Home Depot's bad service. Originally, they gave me last year's model and the tire went flat when it was just sitting in the shed. Then I found out  you have to take the whole metal unit off to take it to a repair place to have the tubeless tire put back on. The bolt was easy to remove, but then a gold cap is supposed to be popped off, so you can pull the arm (leg?) off. But you can't because it fits snugly; nothing can be inserted to pry it out. When I complained, I was told to take the last year's model back and get this year's model. Stupid me. I just assumed the newer one would not go flat so easily, and if it did, it would not require this. Then today, only the second time I used it, the tire went flat while I was using the machine. Has anyone else had this problem? How do you get the cap off? Home Depot was useless today. I'm supposed to take the whole thing to a repair place, and I don't have a truck. I can't be putting a lot more energy into this; I had cancer last year, and I still tire easily. I like this unit when it runs. Nice and small, but does the job. Please, anyone, HELP!



Gabi,

Call Ariens and have them send you a new wheel/tire assembly. They are familiar with this problem. Bad tire supplier (the supplier has since been given the boot). I'm not sure what you mean about the cap. The only thing that holds the wheel on is a cross bolt and nut (inside the tire on a 939003, outside on the 939001). The wheel should have anti-seize between it and the axle. Should slide off easily. There may be a plastic cap on the end of the wheel, but that doesn't need to come off.

PK

This message was modified Jan 21, 2008 by Snowmann
Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.