Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Just put a Tiny-Tach on the Snowblower. I really had no place to mount it without covering something up so I decided to fab a bracket out of some leftover aluminum from another project. The bracket is angled down at about a 30 degree angle to make it easier to read and so the snow and water will run off.

[IMG]http://i5.photobucket.com/albums/y193/tractor56/TinyTachonSnowblower001.jpg[/IMG]

[IMG]http://i5.photobucket.com/albums/y193/tractor56/TinyTachonSnowblower003.jpg[/IMG]

[IMG]http://i5.photobucket.com/albums/y193/tractor56/TinyTachonSnowblower002.jpg[/IMG]

Here is a pic of the blower, I think it's gonna get a workout this weekend. We're supposed to have some heavy snow on the way.

[IMG]http://i5.photobucket.com/albums/y193/tractor56/Snowblower001.jpg[/IMG]

Nice job bud. 

OOOOOOhhhhh yeahhhhh.  Now that's a  machine.  All business.

Enjoy.   

Nice job! I have one on order. Your machine looks strangely familiar!

The only caveat might be corrosion due to different metals being joined. Might want to paint the bracket and attach w/nylon hardware?

Tubby wrote:

I'd just put a couple of layers of electrical tape between the surfaces to prevent metal to metal contact. 

I attached my tach by using velcro.  I use a Redington tach that allows the tach to be easily separated from the wire to the spark plug lead.  That way, I leave the wire on the machine and use the tach somewhere else during the summer.  The wire just clips into a slot on the back of the unit.  To use it on another machine you just need to get another piece of wire of the same  or similar gauge and hook it up.  I also have a Tiny Tach.  I have the model that goes to 20000 rpm.   Good units but I paid close to $70.00 for it and don't like the idea of the battery dying in five years. 

Denis, thank you for fixing the pictures. I wish this forum had a way to preview the post so I could make sure it was ok before posting. Next time I'll omit the IMG and see what happens. 

Here is mine. Through the use of modern adhesives, my total install time was about 10 minutes.

OK, gut check time. Do I have to re-evaluate my life as I know it because A), I got excited enough about a new machine to install a tach ($22 on flea bay!),
or B) because I just took the time and posted them to a forum? ???? I am geek!

Here's mine:

It's a Redington.  Reads to 7000 rpm.  One wire only to the spark plug lead and quick detatch to use it on another machine.   

Tubby wrote: Tubby, your install looks very professional. I think I'm going to copy your zip tie idea.

Hello dudes and happy chrismast.

I read all day this forum, but this is my first post. (sorry from my poor english)

I see many people here use tyni-tach - redi-alert. need some info please.

It's possible to use this to set rpm when you adjust governor?

And need some info to for how you connect this? I have no alternator to my snowblothrower.

thx..

Yes, it is accurate so that you could set your gov.
They are very easy to hook up, one wire goes to ground, one gets wrapped around the ignition lead. It took longer trying to figure out where to put it.

The Redi Alert is even simpler.  One wire to the spark plug lead.  That's it.