Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


Talldog

Name Terry Coffman
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 34
Number of Posts 34
Number of Reviews 0
Date Joined Nov 25, 2007
Date Last Access Dec 25, 2009 3:16 pm
Talldog's last  
Re: Please need help with snowblower!
#1   Dec 23, 2009 9:21 am
I tend to agree with Borat, but I'm going to take it a little further.  Sometimes with old machines, over a period of time, you get a bunch of water/sediment build up in the bottom of the gas tank.  Normally it just sits there, but if the tank is run completely dry of fuel, all this water and gunk gets sucked into the fuel line and can either clog the fuel filter or the carb.

First thing I would try is to change the fuel filter if it has one (it might be in the gas tank itself).  If that doesn't work, I would clean the carb.  You said the blower was working ok before it ran out of fuel so most likely it's either the filter or the carb.

Before you dig into it, get some new fuel line because the old line has probably hardened and you might ruin it taking it off.

Re: Simplicity is gonna get a workout today!!
#2   Mar 24, 2008 8:56 am
mfduffy wrote:
Southern Wisconsin got dumped on today. As it's so late in the season and the ground was starting to warm up, it's heavy, heavy, heavy. I mentioned previously in this thread, that I sprung for Simplicity's 1524 -- their Signature Pro series. The extra horsepower and sturdy frame are much appreciated when dealing with this stuff. Though we average about half as much snow as we've gotten this winter, I have no regrets on spending the extra cash. Years like this will make it well worthwhile. The bells and whistles don't matter so much, I know, but I can affirm the advice of so many on this forum -- buy as many horses as you can afford.


You guys got it a lot worse than we did, but we still got about 6" of the real heavy wet stuff in Northern Illinois. I think this year is a record as far as snowfall goes. I was afraid that we weren't going to get much snow this year since I bought the new Simplicity. I wish I could get this lucky in timing the stock market.

When I was a teenager, I bought a used Snowmobile. I kept it a few years, but because we weren't getting much snow, I sold it. The next winter after I sold it was the winter of 78-79, nuff said.

I still really like the new machine and haven't had any problems yet although the electric chute rotator makes me nervous. As I said in a previous post, I wish Simplicity would provide a manual backup.

Re: Simplicity is gonna get a workout today!!
#3   Feb 7, 2008 4:27 pm
Tubby wrote:
I love my new Simplicity EXCEPT:

Three times now I have gone out to the shed to use it, started it, and find the electric chute control froze in place. That is getting me a little bit angry. I wonder if there is manual control I can put on it.


I haven't had this problem. I do store it in an attached garage, but the garage is not heated. One of the first things I did after getting the machine was to smear some synthetic grease on the gear and teeth on the chute.

I love the electric chute control, but I do wish that there was a manual backup.

Simplicity is gonna get a workout today!!
#4   Feb 6, 2008 3:03 pm
Northern Illinois, about 10" of snow on the ground and another 4" on the way before it's over with blowing and drifting on top of that.  This is the most snow at one time this area has got in years. Really glad I bought the new blower this year. I don't think my old Toro would have been up to the task.
Re: Problem with tecumseh 8hp that don't start...
#5   Jan 4, 2008 9:04 am
kremack wrote:
Ok so here's the thing...I just removed the carb again to clean it completely just in case that I forgot to clean something before...I will re-install it tomorrow. The fuel is getting to the carb without problem, the spark plug is doing spark but it still not start. Yesterday I verified if the magnet that is glued on the flywheel was there and everything look nice, the spark plug is getting wet if I try to start the snowblower....I already open the head of the motor and both cylinder and piston are nice...The valves are dirty but working fine so I cleaned the the best I could.Like I said I will re-install the carb tomorrow and give it a last shot, if it's still won't start I will bring it to a professional...

If you think about something else don't hesitate...

Thanks.


Just wanted to add that you can't really tell by "looking" at the piston/cylinders. You need to check compression with a tester. They aren't too expensive, or maybe you could rent one from an auto parts store. If the compression is low, it might be a bad head gasket also.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.