Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

friend of mine rebuilt his carb.put it back on,now its leaking gas,any ideas?

hi niper,as i was talking to him earlier the problem has been solved,just got home  from work,the needle seat was put in upside down,that little one with the groove in the middle.thanks

needle seat is probaly the problem

Download  HERE  for carb rebuilding

Just a quick note for the future.  So others might not make my mistake.  This seems like a good posting to put this in.
I decided to do a carb rebuild the night before the big storm. Soaked all the parts in cleaner for a period then attacked every orffice on the carb body with my air compressor.  After reassembly it leaked gas out the little vent tube behind the choke plate.
I disassembled again and found I had blown the seat (needle and seat) out of the carb and didn't notice.  The seat is a little white donut impossible to find on a garage floor.  A night of shoveling and a trip two towns over to the power equip store and I was back in business. 

Another note,  it's worth buying the carb rebuild kit if your going to open up the carb.

how long did you spend looking on the garage floor?bet that really pizzed you off

lol

l've done that myself years ago, thats how l remove the old seats when l rebuild tecumsech carbs, its easy and u dont  risk scraping the side of the carb when removing old seat.