Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Need a new Tecumseh Engine
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
poorshoesless
Joined: Dec 15, 2007
Points: 9
![]()
|
 |
Need a new Tecumseh Engine
Original Message Dec 15, 2007 9:22 am |
|
Morning all,
I have an Ariens ST7524E that I purchased new from HD in Oct05. It come w/the Tecumseh OH195SP-73502C. Long story short, engine leaks oil. Took it to Voss Brother back in September and got it back last week, they replace the engine cover under warranty. Anyway, when I fire it up and it still leaks oil. Call them for a pickup this past Friday, they never did come. I am sick and tire of dealing w/Tecumseh and their service dealer. I need a new engine that I can just swap out. Does anyone know where I can get one? Thanks. KT
|
poorshoesless
Joined: Dec 15, 2007
Points: 9
![]()
|
 |
Re: Need a new Tecumseh Engine
Reply #4 Dec 15, 2007 1:41 pm |
|
Take your belt cover off on your blower and measure it! Yo can then measure shaft diameter, length and height of shaft from platform!! Fred Fred, thanks for the suggestions. When measuring the height, do I measure to the center of the shaft or the bottom of the shaft? KT
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
|
|
Re: Need a new Tecumseh Engine
Reply #5 Dec 15, 2007 2:19 pm |
|
Center!! That is the only constant on an engine that may come with a 3/4 or a 1 inch shaft Also at Small Engine Warehouse, you can click on an engine, then on Spec's and that will give you the measurements of the engine!! Fred
This message was modified Dec 15, 2007 by jubol
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
|
|
