Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Need a new Tecumseh Engine

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
poorshoesless


Joined: Dec 15, 2007
Points: 9

Need a new Tecumseh Engine
Original Message   Dec 15, 2007 9:22 am
Morning all,

I have an Ariens ST7524E that I purchased new from HD in Oct05.  It come w/the Tecumseh OH195SP-73502C.   Long story short, engine leaks oil.  Took it to Voss Brother back in September and got it back last week, they replace the engine cover under warranty. Anyway, when I fire it up and it still leaks oil.  Call them for a pickup this past Friday, they never did come.  I am sick and tire of dealing w/Tecumseh and their service dealer.  I need a new engine that I can just swap out.  Does anyone know where I can get one? Thanks. KT
Replies: 1 - 5 of 5View as Outline
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Need a new Tecumseh Engine
Reply #1   Dec 15, 2007 9:55 am
Google: Engine Warehouse!!

                                       Fred

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
poorshoesless


Joined: Dec 15, 2007
Points: 9

Re: Need a new Tecumseh Engine
Reply #2   Dec 15, 2007 12:09 pm
Thanks Jubol.  Does anyone know what the crankshaft size is on this engine (Tecumseh OH195SP-73502C)?  Or where I can find the information? I did a search on Tecumseh site and come up empty.  Thank you.
This message was modified Dec 15, 2007 by poorshoesless
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Need a new Tecumseh Engine
Reply #3   Dec 15, 2007 1:19 pm
Take your belt cover off on your blower and measure it!

Yo can then measure shaft diameter, length and height of shaft from platform!!             

                                                  Fred                                           

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
poorshoesless


Joined: Dec 15, 2007
Points: 9

Re: Need a new Tecumseh Engine
Reply #4   Dec 15, 2007 1:41 pm


jubol wrote:
Take your belt cover off on your blower and measure it!

Yo can then measure shaft diameter, length and height of shaft from platform!!             

                                                  Fred                                           



Fred, thanks for the suggestions.  When measuring the height, do I measure to the center of the shaft or the bottom of the shaft? KT
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Need a new Tecumseh Engine
Reply #5   Dec 15, 2007 2:19 pm
Center!!

That is the only constant on an engine that may come with a 3/4 or a 1 inch shaft

Also at Small Engine Warehouse, you can click on an engine, then on Spec's and that will give you the measurements of the engine!!

                     Fred

This message was modified Dec 15, 2007 by jubol


Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
Replies: 1 - 5 of 5View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.