Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Simplicity snowblower
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Nbaglio
Joined: Dec 3, 2007
Points: 4
![]()
|
 |
Simplicity snowblower
Original Message Dec 3, 2007 8:56 pm |
|
recently I have changed the worm gear on my Simplicity Snowblower. I just started to use it last nite and the auger will not spin but the impeller will. I noticed that the houseing for the worm gear is moving upwards. I think that the two gears arent touching one another but I am not sure what to do?
|
Nbaglio
Joined: Dec 3, 2007
Points: 4
![]()
|
 |
Re: Simplicity snowblower
Reply #5 Dec 3, 2007 10:58 pm |
|
THe gear has a pin that goes through it and the shaft... http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_400_0901_05_LW_SA.pdf
|
Nbaglio
Joined: Dec 3, 2007
Points: 4
![]()
|
|
|
Re: Simplicity snowblower
Reply #6 Dec 5, 2007 5:46 pm |
|
It ended up being the bushing at the end of the roller worm shaft was broken..thank god it didnt ruin the worm gear.
|
|
|
