Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Trying to pick a replacement for my Craftsman single stage snowthrower that I am replacing due to difficult starting and since it is generally inadequate in clearing my drifts,EOD, and heavier accumulations.

Background:

I have an 80ft flat, paved driveway, appx 20ft wide and a bit of side walk to clear.  Although NOAA says my average snowfall is 24"/yr, some years we don't seem to get any and other years (such as last year), we get about double that, some times in the 12"-14" range.  I live in a windy area where drifts get in the 2' + range.  Storage of unit with clearing width to 30" is not a problem.

Choices:

Budget $1000-$1500.

Toro 826LE or 828LXE-I have several good service/dealer locations nearby (price $1099/$1399)

Simplicty L10530E-Having a Simplicity Tractor, I know the dealer fairly well-average as far as service/support (price $1499)

Ariens 824E or 1027LE-Dealer is about 20mile away, don't really know him. (price $999/$1200)

These were the ones I was considering, I see +/- to each.  Let me know what you think or if you need more info.  Thanks

I think Toro and Ariens are, for all intents and purposes are about equal in my mind.. After sales support should also be a major consideration before making your decision and it looks like you've done that. I'd go for one of the Toro models that best suits your needs.

I'd go Toro!!

Go to the reviews section and read up on what other folks say about their blowers!

                                                          Fred

Just checked the review section, some one erased the snow blower reviews??

They were there last year!!

                                                             Fred

Thanks for your opinions. I've read the reviews here....and everywhere else I can find.  The reviews are still here.......http://www.abbysguide.com/snow-blower/reviews/..

I didn't know if the advantages of the Simplicity 10.5 Briggs itek snow OHV, cast iron gear box, etc were enough to justify the price or were overkill for my application.

Once again....thanks for your opinions....if anyone else has any ideas, I'd appreciate them.

there is a sears forum available and it has all kinds of folks telling it about their sears and some are x employees who can tell you best ones to get and sales etc..do a search like SEARS LAWN EQUIPMENT FORUM,that might work, you get the point..

i used to be on their all time,they know their stuff..

i would by SEARS on sale,best deal..

i have sears 7.75 hp brigs ohv.i think its 26 inch wide..

it clears snow as deep as 22 inchs. so far..

if i had a lot of snow and deep i would get like a 11 hp one and nice and wide.

most snow we get here in pa is like 12 inchs latety and my 7.75 works fine....

The Briggs is prolly a better engine( since the B&S engine in question and Techumsa have no info on their web site it's impossible to tell ) but it's the tranny I'd be worried about on the Simplicity.

I'd much rather take a look at the performance curves myself

      

Hmmmm, I hadn't heard of any specific tranny problems with the simplicity.  What kind of problems should I be concerned about?  Thanks . 

For what ever reason I cannot post images.

What I was going to post was a review that shows the Simplicitys throwing distance isn't  where it should be when compared to other machines in it's class. That to me indicates there may be an issue with the mechanical advantage used on this machine

toro all the way.  the auger design is superior to any ive seen.  it will out throw all on market.  no tranny on the toro.  just good old fashioned gears.  keep them clean and lubed during summer, keep rust to a minimum.     these have the tecumseh engines on them,  which have proven very good engines on the snowblowers.  im not a summer tecumseh engine fan,  summer engines belong to briggs.  there is a reason snowblowers for 50 years run tecumsehs. if you do go back and look at the simplicity,  which briggs and stratton owns as well as snapper,  ask the dealer if the specific unit you are looking at has had the recall kit installed on the carburetor.  they have an issue with staring on fire.  its service bulletin  #738.  if you look closely at snapper and the simplicity lines the are the same units only one is orange and the other red.

Probaly Mech is right for today's market, because some companys had change their quality and design not for the best sometimes, but in my book, I think Ariens blower are the best before 1990. Well thats my oppinion, and I knbow that TORO is a very very good machine too.

Thanks for everyones input thusfar.  I visited my dealer today.  They've got 3 828LXE's in stock.  That's the way I'm leaning right now.  I'll post when I've made my purchase.....Thanks again.