Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro 824 Snowblower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
More_Power


Joined: May 27, 2007
Points: 7

Toro 824 Snowblower
Original Message   May 27, 2007 8:55 pm
Hello everyone. First time posting on this forum.

I was given an old Toro 824 for free. I think it's a 1989 model. I never owned a snowblower so I don't know much about them. The only snowblowing I did was with my two arms and a shovel.

I just dismantled the blower in my garage because of rust all over and are in the process of painting the engine shroud peices, the entire auger assembly and shroud, and the wheels. I took off the carb and cleaned it also. It ran great before the teardown and hope it runs better when I'm finished.

I just have some questions;

1) I purchased a new muffler but there was no gasket with it. The old muffler had no gasket either. Should there be a gasket?

2) What engine oil should be used?

3) What type of spark plug? (I just want to be sure it has the correct one)

4) Should there be oil in the auger gear assembly? I read somewhere grease is only needed.

5) Should there be an air filter? I didn't see one attached.

Here are some images.

The teardown...




Here is the painted engine shroud and auger shroud...



Here is the cleaned carb with newly painted linkage bracket...




Many more things to do...

:)

This message was modified May 27, 2007 by More_Power
Replies: 17 - 19 of 19Next page of topicsPreviousAllView as Outline
Toocool


Joined: Nov 24, 2010
Points: 1

Re: Toro 824 Snowblower
Reply #17   Nov 24, 2010 1:10 am
shawnat wrote:
I need help.  I have a student that is rebuilding this kind of snowblower and need a manual to put it back together.  I work at an alternative school and would like to help him in his project.  I would like to be able to review a manual so he can understand what to do.  If anyone can help it would be greatly appreciated.  Thank You.
You can get the manuals from Toro's website.  Go to toro.com, click on homeowner, then customer care,
then manuals, enter the model #, (which on my toro was on a sticker on the back), hit search, at the bottom click manuals again, then download both the operators manual (general stuff), and the drive systems manual(which is a little more technical).  Don't worry about buying them.  Just download and print off a copy if you need them.  There may be more information but this is all I've needed so far.
Shryp


Location: Cleveland, OH
Joined: Jul 26, 2010
Points: 532

Re: Toro 824 Snowblower
Reply #18   Nov 24, 2010 4:45 am
Hey cool thread.  Too bad he never came back to tell us how it worked for the next 3 years.
tomjv


Location: North East
Joined: Jan 28, 2011
Points: 2

Re: Toro 824 Snowblower
Reply #19   Jan 28, 2011 7:43 am
I'll tell you what's cool, THAT PIPE ON HIS OIL DRAIN.  Nice touch.  Now he can drop the oil without dropping any on the floor!

I have a '88 521 and they are almost identical.  I like to see that.  To me it means the system must work.

TomJV

Replies: 17 - 19 of 19Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.