Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hi Everyone:

Have a Simplicity Snowblower, 4 years old w/ 10hp Briggs OHV engine. 1st 2 years everything ran great. Mid-season last year (3rd year) the engine started to idle/run rough, stalled under load. Local OPE dealer examined the unit and said carb dirty, had to rejet, adjusted to run leaner. Used the machine 2-3 times afterwards and it ran like new again.

Used the unit for only the second time this year about 2 weeks ago. Same problem all over again with somewhat rough running/idle and stalling under load. Stored the unit over the past seaason with Stabil in gas and run it with gas with Satbil in it (put in when gas purchased late last fall).

Any thoughts on what I'm doing wrong. Not experienced with engine work, carb cleaning. etc, but can turn a wrench. Is this tough to do for an inexperienced DIYer, or shoudl I just shell out another $100 for repair and pickup/delivery ? (although it's getting expensive).

Thanks in advance.

Fran

I've heard that two different things can happen:

1. Moisture is abosobed, degrading the fuel and causing corrosion; and
2. The volatiles is the gas evaporate ( that's why they're call "volatile" ) and leave a gummy residue in the carburetor. Some people say carburetor cleaner will fix, others say a rebuild is needed. It probably depends on how bad / old the unit is. The fule also degrades due to the evaporation.

It seems the best solution for any gas engine that is going to be stored for more than a month, is to empty the gas out, run it dry and put fresh gas in when you are going to use it again. I like to make sure the last tank at least has a stabilzer in it so that if I don't get everything dry at least I've upped the chances of the leftovers staying "good". I've also heard that if you are going to leave it with fuel, fill the tank up so you have less air moving in and out due to temperature changes.