stevei54
Joined: Nov 5, 2006
Points: 4
![]()
|
 |
MTD Reassembly
Original Message Nov 25, 2006 9:53 am |
|
I have a 1995 MTD 8hp snowblower - Model 315e640f013. I had torn the machine apart to replace an Auger, but when I put it back together the auger pulleys seem to be rubbing tight against the box frame. The only parts that I saw was the pulley adapter that wen directly against the bearing ( with the bearing sitting flat, but when you tighten the pulleys down they seem to get too tight and rub against the frame? I know its probably something simple but I also noticed the belts appear to not roll right as well?
thanks for any suggestions.
|
