Yamaha YS624 snowblower light

swoodside

Joined: Jan 26, 2006
Points: 4

Yamaha YS624 snowblower light
Original Message Jan 26, 2006 1:46 pm

The light on my Yamaha snowblower stopped working & I'm not sure how it should be tested. When I hook up a voltmeter there appears to be NO voltage; is the correct way to test that @ the 2 wires that connect to the light? (I would think so) Do I need to follow the wires & then check the lighting coil (however that's done!)? Thanks for any info someone may have, Steve

AKAmajorxlr8n

Joined: Nov 3, 2006
Points: 76

Re: Yamaha YS624 snowblower light
Reply #8 Nov 3, 2006 2:00 am

Foddy wrote:

I just went to proncess auto and bought a 12V halegon spot lamp, for $22. I opened the box and realized ther is only one wire comming from it. I don't have an alternator, or even a battrery, its farly old but it works fine. the light provides alot of light, but i need to know how to hook the wire up to. is there a way to hook it up to the magneto? If so weer, do i have to split the spark plug? If you have any advice or can explain it to me, please email me at AAAKings@hotmail.com.. thnax alot

How do you know it provides a lot of light when you don't even know how to hook it up?!?

Seriously, if you think you can connect it to the spark plug wire, I say STOP RIGHT THERE & PAY SOMEONE TO DO IT BEFORE YOU RUIN THE COIL OR HURT YOURSELF!!!

Marty FORMERLY MAJORXLR8N

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions