Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I just came in from blowing my drive and I’m finding that my relatively new Ariens 11528LE (bought last year) seems to be struggling to blow snow. As soon as even a minimal load is place on it the unit begins to ‘chirp” or “squeal” and at the same time the volume of the snow that gets thrown is reduced substantially. Could it be a belt slipping?

 

I read other posts here that suggest that ice can get behind the impeller. That’s not the case here as the unit is stored indoors. Anyone have any insights?

 

Thanks in advance.

 

Chuck

did you readjust the belts after the initial breakin period?

Hi Chuck1:

I basically have the same machine. (Ariens 1128DLE)

I would remove  the black plastic cowling (2 screws) which covers the 2 belts.

With the engine off, I would check squeeze the auger control handle to make sure the belt pulley moves enough to pull the belt tight.

This may not have been set right by the big box store or OPE dealer.

I needed to adjust my pulley last week as my belt stretched a bit over 2 years.  I loosened the pulley bolt moved the pulley 1/4 inch which solved the problem.  I would start there first.

Bill

Thanks guys! I didn't adjust the belts after the breakin. I'll give those adjustments a shot this afternoon. I'll let you know how I make out.

Cheers,

Chuck

Guys,

I did what you suggested, using the manual as a guide, and made the pulley adjustment to the belt, then checked the tension on the spring - all looks good and the thing really kicks %$*# now!  Thanks so much for your help!

One thing though is that with the auger control handle down the attachment belt is still not what I would call tight. How tight should that belt be with the auger handle in the engaged position?

TIA

Chuck