Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
cleanmaxx_brian
"At least I am enjoying the ride"
Location: Wantagh, Long Island, NY
Joined: Mar 12, 2005
Points: 231
![]()
|
 |
"Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Original Message Dec 13, 2005 5:53 pm |
|
Hi all, Went upstate this past weekend to Cortland County (near Syracuse) to visit my mother. While I was there I swung by an old Ariens dealer to see if he had any of those snow cabs for my Ariens 8526LE. When i walked in I was greated with lots of nice machines....Simplicitys all over and a bunch of Toros. But no Ariens...so I just wondered around and was really digging Toro's new quick aim snow shoot! Pretty cool! But lots of plastic.... The Simplicitys look rugged and well built. Then the salesman/owner came out to ask if he could help. He didn't have any of the cabs but they were due in a week or so....then I asked him "where are the Ariens machines?" His reply.... "Ariens really cheapend their product to get it into Home Depo" Is there any truth to this? He went on to say that warranty work was killing him...his shop was full of repairs...and mainly all with the same problems. He said that the tranys were a major problem....plastic bushings causing problems and some other things that I can't remember. He said that after the last 2 years, he gave up. Clarks garden power supply They carry Simplicity, Ferris, Echo, and Toro...and no longer Ariens:(
Brian ChangAriens 8526LE, Bradley 32" 12.5HP walk behind mower, Echo BP200 blower, Troy Built 4.5HP Pressure Washer, Craftsman 4.5HP Yard Vac, Homelite line trimmer, Scotts 21" high wheel mower, MTD 3.5HP Edger.
|
cleanmaxx_brian
"At least I am enjoying the ride"
Location: Wantagh, Long Island, NY
Joined: Mar 12, 2005
Points: 231
![]()
|
 |
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #25 Dec 25, 2005 10:12 pm |
|
I wonder if you could get a serious discount by offering to take a "defective" machine off their hands? Nope! I worked for Home Depot as a district manager and there are NO deals for employees or customers for the most part. The only time they will discount (and spray with orange paint!!!) is with a return that the customers says is in good working order.
Brian ChangAriens 8526LE, Bradley 32" 12.5HP walk behind mower, Echo BP200 blower, Troy Built 4.5HP Pressure Washer, Craftsman 4.5HP Yard Vac, Homelite line trimmer, Scotts 21" high wheel mower, MTD 3.5HP Edger.
|
MountainMan
Overpowered is Usually Adequate
Location: Connecticut
Joined: Feb 19, 2003
Points: 1564
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #26 Dec 26, 2005 3:23 pm |
|
I was all set to buy an Ariens 11hp, went to the Home Depot the day after a storm, and they were sold out. My daughter and I looked around the store and finally, out in the garden department we saw 12 of the 11hp models. Evry single one of them (two still in the original boxes) were marked defective for return.
I dont believe they were Defective, mearly misued or mis assembled by HD employees. HD doesnt troubleshoot the proble,. Just ships them back. Ive see the same setup in the summer with John Deere tractors. All in the steel shipper crates set for return. Customer brings it back and HD returns to Deere. A true servicing dealer would re-adjust or find the problem and fix the unit, or avoid the problem with proper setup. Defects in large products are less then 1 in several hundred. So why do HD and other box stores have dozen and dozens of defective returns from the same product line? They dont.... Defective employees and customers.
Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
|
Charlie4350
Joined: Dec 21, 2005
Points: 2
![]()
|
 |
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #27 Dec 27, 2005 1:00 am |
|
This is really getting carried away. 12 defective units, some still in boxes. Use you head. Too much speculation and guessing going on IMHO. Here's what I found and BELIEVE to be fairly accurate when looking for snowblower. Recall on Several snowthrowers with Tecumseh engine concerning the gas line and a 10 cent part. What exactly, don't know, but received this same story from several vendors and on many makes and models. All units were pulled from the floor to be corrected. Now, I won't state this as fact, but I'm sure some of you guys are aware of what the problem was. Again, this was at a few different stores and included several manufacturers. What to do. Get your snowblower home and check it over. There's not much assembly done at the store and is well described in the manul. On the bright side, one is forced to become familiar with their machine to make sure all is well before the snow hits. |
russman
Joined: Dec 14, 2007
Points: 1
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #29 Dec 14, 2007 2:57 pm |
|
I bought a brand new snowblower from HD 3 years ago because I heard Ariens was the best. It ran great the first year and then the second year it would run and die after 5-10 mins. I used an old snowblower that was given to me as a second and it started up and ran well, even with old gas in it. On the new one I took the carborator apart, cleaned it, and cleaned out the gas tank and it still does the same thing. I spent 1300 on this 11 HP piece of junk and found out other people had the same problem. Some say it's the float that is bad in the carborator so I'm going to try that next. I bought this machine so that I wouldn't have to work so hard shoveling snow and yesterday I worked on it for 3 hours it started and died again. Then, after trying to start it so many times the cord broke. I pushed it aside and used the old snowblower instead.
|
MountainMan
Overpowered is Usually Adequate
Location: Connecticut
Joined: Feb 19, 2003
Points: 1564
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #31 Dec 14, 2007 5:12 pm |
|
I bought a brand new snowblower from HD 3 years ago because I heard Ariens was the best. It ran great the first year and then the second year it would run and die after 5-10 mins. I used an old snowblower that was given to me as a second and it started up and ran well, even with old gas in it. On the new one I took the carborator apart, cleaned it, and cleaned out the gas tank and it still does the same thing. I spent 1300 on this 11 HP piece of junk and found out other people had the same problem. Some say it's the float that is bad in the carborator so I'm going to try that next. I bought this machine so that I wouldn't have to work so hard shoveling snow and yesterday I worked on it for 3 hours it started and died again. Then, after trying to start it so many times the cord broke. I pushed it aside and used the old snowblower instead. OLD TOPIC. BUt, Its not an Ariens problem, its a Tecumseh problem, they make the engine. They alos built a huge majority of the engines. BTW, Gas issues are the #1 reason for failure. I think it needs a pro to go through the carb.
Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
|
snowman
Joined: Jan 18, 2005
Points: 29
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #32 Dec 15, 2007 8:22 am |
|
My 2004 9 HP from HD has run flawlessly. Purchased as a serviced unit on sale and with a coupon, but that was a joke of sorts. The machine appeared to never have been started, and the fuel line was kinked and blocked just under the tank and before fed into the engine. Straightened that out, it started right up and has run fine. I only regret not getting the DLX with a differential, but that's my problem.
I bought it to replace a 1970 7 HP because the growing number of times it wouldn't start I really had a problem. Kept it as a "backup" but prefer using it to the newer one and put a NOS engine on it. Use the new one to throw distance and do the initial "dig", and the nimble and easy to turn older one, which is still incapable of a long snow throw, to cleanup with.
The local dealer really has his "nose in the air". I only once bought a belt there in desperation. He made it seem like I was buying a bag of gold, and charged accordingly.
I see nothing wrong with buying one from HD. Seems everyone here is inclined enough to assemble one from the box, and shouldn't be set back if "Timmy" doesn't set it up to perfection.
|
Gelid
Location: Maine
Joined: Nov 19, 2007
Points: 84
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #33 Dec 15, 2007 2:23 pm |
|
I see nothing wrong with buying one from HD. Seems everyone here is inclined enough to assemble one from the box, and shouldn't be set back if "Timmy" doesn't set it up to perfection. The problem is not so much fixing Timmy's assembly goofs -although this will be an issue for many people- as getting the unit seriously serviced under warranty should it require it. They won't always give you a new one and more than likely won't lend you one while yours is being serviced (elsewhere) like my dealer does for his customers who don't have a backup.
Honda HS928 TCD - If you lived where I live you'd have one too
|
Tubby
Joined: Dec 5, 2007
Points: 78
![]()
|
|
|
Re: "Ariens really cheapend their product to get it into Home Depo" Any truth to this?
Reply #34 Dec 15, 2007 11:15 pm |
|
Quoted in whole from another post on this board:
| Re: Help on Ariens model 932101
Reply #6 Today 10:19 pm | |
Ok heads up to all you Ariens 824 932101 owners Purchased from the Home Depot or other Ariens dealers . The Important thing here is 824 932101. Let me tell you about my experience not unlike what you are experiencing and others as well I am sure. I purchased this product brand spanking new from the Home Depot in December of 2000 In MA for $ 999.00 total of $1050.00 with tax..
This machine never worked right from day one. Would not throw the snow. You would have to stop or run it very slow. To all of you wanna be mechanics with a quick fix please take a chill and let me finish before you offer your solutions. Plus they will not fix the problem. Took it to an Ariens Dealer in Natick MA that i do not recommend. The unit was 2 weeks old and they charged me 85 bucks and it was under warranty. They adjusted the machine and installed a new auger belt. Nothing else said. I called Ariens corporate nice woman took care of the problem and got my money returned to me with her corp appologies.
So guess what? You got it, the machine starts doing the same thing. At this point I am bulls$%*. Being mechanically inclined I take the cover off of the auger and adjust the pully to put more tension on the belt throws like a charm. A few other adjustment. Then as the season goes on it starts throwing snow less. You have to slow the machine down. Stop it let the auger catch up to speed to throw the snow. New belt. Calls to home depot no satisfaction. Calls to Ariens same woman but I asked her the following., Miss do you make a lower grade Snowblower for the Home Depot? Her response was NO we make them with all the same internal components. PLEASE keep this prior underlined sentence in mind for later it is very important.
So I keep fixing it adjusting and have been fed up. 2 more years go by more calls to ariens and the depot no satisfaction. In the interim I also own a MTD 8 horse same motor that is on the Ariens that is 12 years older and tt works like a charm. I use it at my mothers house 2 miles away. Never Stops working blows the snow and ia considerably faster than this Ariens.
Around 2006 I phoned an Ariens dealer and he told me to call Ariens with my model Number the dealer new what was up. I Called Ariens now please keep in mind that almost 6 years has passed. I ask the question of recalls or anything pertaining to the 824=932101 SHAZZZAM wanga Bango. Ariens Tech " Sir there is a problem with that machine we have a gear reduction kit that will replace the problems that you are having with your machine, please give me all your information and I will put you in the computer this will repaired by Ariens free of charge at any Ariens Dealer" WOW after 5 years somebody tells me they had a problem with the machine.
The unit gets the GEAR REDUCTION KIT. Sounds kinda funky..Like sorry your new car had the wrong transmission for the engine we are gonna reduce the ratios so instead of you going 60MPH you can only go 30 MPH max. That is esentially what the gear reduction did. Changed the ratio of the drive gears to compensate for the horspower of the engine which intern kill the auger as well. Major DEFECT and we where all hosed by Ariens and The HomeDepot.
The gear reduction has slowed my machine down in 5th gear to more than half. The Unit is throwing snow porly at best. The machine churps/Belt which is adjustment again the cycle just continues.
More calls to Ariens now this one gets great the other day. The womans Name is Joy In Consumer Tech. Tell her the story she admits there was a problem but the unit is so old and plus the gear reduction should have taken care of the problem. Take care of the problem for Who Ariens. Not me. And then she ads you know there is more moisture in the Air in the east coast where you are located and the effects the machines. I almost lost it on her. So I think we all know where I am coming from. I also met with the NORTHEAST Ariens Rep..Accidentally I might add. I walked into my Dealer that has done the repairs and this guy cam over to me and asked if he could help me. This gets really good. Yes I say. Have you repaired the problems with these damn friction disks. Not knowing he is a rep. He answers there are no problems with the friction drive. I chuckle. Then I say. hmmm I had a gear reduction kit put in mine.. He answers oh yes you must have the 824 932101 and purchased it from the home depot. My reaction put it this way it was one of those kodak moments. Then he continues after I push the conversation. Well you know the depot wants so many of these machines at a pricepoint we cut some corners when we made this machine. Plus the snow in the east has more moister in it. Hmmm I wonder if the 16 year old MTD knows about moisture that exceeds the dependability of this Ariens that was defective from the manufacture the day it left the plant. What bothers me, how many consumers purchased this unit that had now clue that it was defect or just plan gave up and either bought a new one or a different make.
In closing all interested parties I am going to pursue a class action suit against The Home Depot and Areins over this mater. If you have this machine please contact me at the below email for particulars in the subject line please Enter; RE 932101 smugman_ola@yahoo.com
Thank you all.
(end quote) From my observations getting back into the blower market, I would say yes, their quality has gone down. My old machine has steel rods for controls, the new ones seem to only have cables? That is just one visible observation I made anyway.
This message was modified Dec 15, 2007 by Tubby
|
|
|
