Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Eureka FluidFilm
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
BobSmith
Location: Ontario Canada, snowbelt off Georgian Bay
Joined: Nov 16, 2005
Points: 30
|
|
Eureka FluidFilm
Original Message Dec 12, 2005 5:05 pm |
|
Anyone use this on their snowblowers? A small engine place in Ontario Canada seems to swear by it as it's applied to all blowers sold or serviced. I'm just researching what might work best in the auger/impeller area of my 7524 to prevent rust (already have some healthy scraped off paint where the impeller rotates, due to ingestion of ice chunks EOD) and help prevent impeller freezing, not to mention lessening snow sticking in the chute.
Thanks for the suggestions --penetrating oil/liquid wrench, etc., I'm just trying to cover the field before I apply anything. I don't suppose this would invalidate the warranty would it? And flammability. All of that stuff, penetrating oil, etc., is highly flammable. Is there any danger when applying it inside the shovel housing?
BTW I haven't had a problem w/my impeller freezing since I started running it 3-4 minutes before shutdown. Knock on wood and keep my fingers crossed. The behind-the-impeller-pancake even melted due to some warmer weather and it would probably be a good idea to get some lubricant into the area behind it before I use it gets coated again. Anyone that has used that stuff, please reply. Thanks.
|
|
|