Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

hey guys.  I  need some help with my riding craftsman mower.  It is a 42* deck and scalps my lawn when riding sideways on a hill or making a u-turn.  I have narrowed it down to needng guide wheels, so I bought some guide wheels from sears to add onto the deck.  Following the instructions, I installed them onto the front of the deck.  The deck is 100% level left to right and slighloy sloped from front to back, but the problem is the guide wjheels.  at the lowest hole on the brack for the guide wheels, they are off the ground about 1".  is this normal to be so high from the ground?  i am gonna go and try to mow, but am afraid im still gonna scalp.  any ideas? 

I HAVE A JOHN DEERE WITH A 38" DECK. THE INSTRUCTIONS IN THE MANUAL CLEARLY STATES  """" FIRST YOU LOWER THE DECK TO THE POSITION YOUR GOING TO USE"""(on a solid surface say your garage floor) THEN YOU ADJUST YOUR GUIDE WHEELS TO HAVE ABOUT A QUARTER OF AN INCH GAP BETWEEN THE FLOOR AND THE WHEEL. THIS WAY THE WHEEL WILL ALWAYS PUSH YOUR DECK UP TO AVOID SCALPING. ITS BEEN WORKING FOR ME AS LONG AS I CAN REMEMBER.