Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I've purchased this snowblower today at a yard sale for $15.00.  Unfortunately, there are different pieces missing from the engine - so I figure it will be cheaper to just replace the engine (as I can't even identify what kind of engine it was).

What kind of details do I need to be aware of in order to replace this engine?  Obviously, I have to make sure the bolt pattern matches... but what else?

Does anyone have any suggestions as to a worthy engine replacement?

Thanks in advance!

Steve

It sounds like you have a twin of my machine!  I'm missing the engine shroud, gas tank, and pull starter as well!... oh, I'm missing the key too!

Thank you very much for the advice.  I'm going to find the nearest Ariens dealer and see if I can at least get those parts I'm missing.  If not, I'll just replace the motor.

And thank you for letting me know the owner's manual for my machine was on Arien's website!  I was at their website - but they don't advertise that too well - so was glad you told me, since I did find the owner's manual (that I almost paid $10 on eBay for!).

Thanks again!

Steve

The prime considerations will be the crankshaft length & diameter. Your old pulley will have to fit on the shaft in the proper location so that the belts are aligned. I would think any "small frame" Tecumseh Snow King engine should work out for you. Another consideration - does your engine have an auxiliary PTO shaft (2 shafts)? If it does, you will have a somewhat tougher search.

Marty