Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

So I put my Troy Built 2550 psi pressure washer to use and cleaned my unbelievably large wood deck.  Came out great (I'll post a before and after photo when I'm done).  I don't want to have to do this every year, so I need the board's advice on the best sealer to finish the job.  I don't think I'm going to stain the deck (I think the fading would get on my nerves), so I'm looking for a clear or tinted sealer that hopefully will give me a few years good protection.  What do y'all like? TIA!

Take a look at Cabot. They make excellent products. - Kris

I can tell you from personal experience the only brand I would ever use anymore is called one time wood.  Here is the link to their site http://www.onetimewood.com/     We stained my deck and the deck of my best friend several years ago with this product and it still looks great.  My neighbors used cuprinol and another used aa product by flood.  Within two years they were re-applying the product, but not me.  Yes it is expensive, but the amount of time it saves you from not having to re-apply it every two years is well worth it.  I highly recommend this product to anyone getting reaady to do their deck or childs swingset etc.

Hi NYCGator...

Ok... what kind of wood is it ? (assunption)... 

Deck Board  dimensions?  (I.e. 2"x"6"... 1"x4"...)...

Open joints between boards ? ... or tight tongue & groove flooring ?

Smooth ? a little rough ? kinda' rough ? (surface)...

Location in country ? amount of sun & rain that hits it ?   Near the ocean ?

How far off the ground ? Usual use for the deck ?

$$$ any limitation ? Will apply yourself or hire someone ?

Welcome to the best OPE site !

Dave...

Dave,

Here's more info.

1)     Deck board is almost all pressure treated 2" x 4" (wouldn't have been my choice but I didn't build it).  A cabana addition is 2" x 6".

2)     Open joints between the boards

3)     Kinda rough in spots with some splits in some boards (nothing too bad).  The prior owner did not take good care of the deck.

4)     Located on on Long Island, but not on the water (ocean is several miles away).  Most of the deck gets alot of sun exposure as well as rain when well it rains.

5)     The deck has three levels.  The top level is substantially above the ground, the second level is raised about a foot and the last level is on the ground.  Deck is usual use and houses my outdoor table and chairs, sun chairs, BBQ.

6)     No real limitation on $$$.  I will gladly pay more for a longer lasting finish and better quality finish.  Given the size of the deck and my limited time this summer, I am going to hire someone to do the finish work.

I look forward to any suggestions you may have.  Right now I am leaning towards Superdeck's Pressure Treated Stain/Sealer.

CR tested them. Thompson's did not do wel.. The more opaque the longer they last: Here's the Summary:

Best for most decks:
1, 2 Cabot $24, $29
3 Wolman $25
The Cabots are outstanding opaque treatments. (1), an alkyd, cleans up with solvent; (2), a latex, cleans up with water. The Wolman (3) is the best choice for wood worth showing off; it's an alkyd but cleans up with water. Most semitransparent products we tested are alkyds, but (12) is a latex.

#1 Cabot Decking Stain 1480
#2 Cabot Solid Color 1880

3 Wolman DuraStain 18146
#4 Benjamin Moore Moorwood 065

#5 Akzo Nobel Sikkens Cetol SRD 1708902

#5 Behr Deck Plus 200 line

I used a Behr semi-transparent because my wife liked the Color and Home Depot stocks it. I picked a color that thy always stock because you'll have to do it every two years or so. I put two coats on with a airless spray gun for the vertical serfaces and a rolloer or the deck. We have a two story deck so it's a brutal job. I've used Cetol a lot on boats and it holds up well.

Thanks for finding that article Garandman.

Just be carefull with any Solid Color stain, or one that doesnt specifically say DECK ( Horizontal Surface is sometimes used) on it. Some stains will not hold up 6 months if they are walked on. Will end up with traffic wear  and nasty peeling.

 All,

A very easy way to put on transparent  or tinted stain is to use a hand pump sprayer.

They cost no more than $15.00. You may use a little more stain with the sprayer, but it sure goes on fast!!

 You can buy them at Lowe's or HD!!

                                                                                          Fred  

jubol wrote:

I went with TREX, so I dont have to stain anymore. The price difference pays for itself in under 5 YEARS !!

I have to stresss again the onetimewood product.  I have built numerous decks and have used just about everykind of deck sealer out there and none compare to the one time wood.  Rule of thumb, each $10 per gallon generally equals 1 year of wear before resealing.  That is why the products costing 20 to 30 buck need to be reapplied every two to three years and if you have a lot of traffic or harsh sun even sooner.  I don't work for bond industries but when I find a product that works I highly recommend it.  For a comparison, the other products are like using stabil compared to using PRI-G for fuel treatment.  Yes PRI-G is more expensive but how much better does it work.  I think most of us here can agree that it is a much superior product to the stabil and that is my experience with the onetime wood product compared to the other ones out there.  I really think you would be doing yourself a disservice if you did not at least check it out.  Here is the website again www.onetimewood.com

I think I will let my deck go and replace with that plastic decking they have out now.  There are very many benefits to those products.  For future reference is TREX about the best there is?