Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Today i picked up an older John Deere 1032 snowblower. The unit starts on the first pull and is pretty clean with minimal rust. When you put it in drive it goes with no problem but when you engage the auger there was a terrible noise like a metal grinding. My first thought was the bearing in the auger housing was bad so i removed the tractor from the auger housing. The auger turns smooth and there is no play so that proves the bearing is fine. I found that the idler pully that puts the tension on the belt when you engage the auger is mounted to a little bar that moves up and down and at the bottom there is a weld that holds it to the shaft. The weld has a crack and the idler is off kilter. The brake looks worn like it was not disengaging when it was supposed to so i think that was the loud noise.      The unit seems to be like an Ariens the way it is set up. My questions are, How do i get info on this unit to find out the age ? The only numbers on it are 1032. I am going to weld the pully and try to bend the bar to get it in line with the belts again and replace the belts. The numbers on the old belts are worn so i need info on the unit in order to purchase new ones. I will try and get pics up this week. Thanks in advance for any help.

Looks like it's the same belt.  Part # 6836.

i will try and locate the belts tomorrow. thanks for the quick replies. anyone know how to find out the year ??

Your so luck, Knee. I havnt seen many decent older Deere units in Ct in a while.

Hi...

Call a Deere dealer with the serial nimber... should be able to tell all you want to know... parts should be available... probably can even get manuals for it... ask who manufactured it too...

Dave...

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt

Deere has a very nice parts look up. Maybe click Model Search then type 1032 in the model number. your exploded view parts catalog index will come up. Hopefully.

Thanks for all the help. with the links you guys gave me i found the part #s and local dealer and picked up the belts today. I fixed everything that was in need , replaced the belts, oiled and greased everything that needed, and now it runs smooth and everything seems to work as should. here are a couple of pics

.

That looks like a great machine, clean.  I see it also has a differential.   What are you going to do with this one?

I think im going to sell it and use the funds for some other ope i want. if i do not get any good bites i will keep it as a backup. how do you lock the differential on this machine ? it looks like a large wingnut . do i just tighten it ?

Did you find out who the OEM was? Or did Deere engineer it themselves?
When was it made?
Boston craigslist is pretty good for selling that stuff.

Oops - disregard I see you've already discovered that....

The john Deere dealer told me it was John Deere made with input and design by Ariens. They did not know the the year. It is made just like an Ariens except for the dash controls. Garandman wrote: