Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Lockers Prodject
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Termy
Location: Washington
Joined: Oct 24, 2004
Points: 960
|
|
Re: Lockers Prodject
Reply #10 Jun 30, 2005 4:10 pm |
|
Emmo, I understand your concerne but, These lockers have plenty ventilation. They not only ventilate through the front air vent but the lockers also have cracks on the back wall where air can flow in and out. The propane tanks being in the lockers was a much better solution because of where they were before. The tanks used to be in a heated storage room but that room also has my compressor in it. The last time I used my compressor was when I painted the lockers. When I opened the door to that room, the compressor created a temp feeling of 110 degrees F. I knew right away, that was not good for the propane tanks. And as far as the oil rags are concerned, they are 20 feet away from the lockers. Another thing to make you feel better Emmo, is that I have a fire extingwisher in the shop. If there was a fire in the lockers (I so doubt it) the lockers are made out of steel which would contane the fire in one area. Then all I would have to do is put it out with the extingwisher. I am a very safe person lol, I don't really take chances. Which means, I never had a fire at my place.
|
|
|