Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > installing Shear pins

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

jgreen

Joined: Sep 9, 2003
Points: 149

installing Shear pins
Original Message Jan 1, 2005 8:00 pm

I need to replace the shear pins on my snowblower. The previous owner used hardened bolts

. I ordered a few replacements when I placed an order with Jacks Small Engine.

My question is this... The shear pin consisits of a bolt ,nut and a little coller. how do you correctly install this type of pin?

John
Scotts 21" self propelled mower
MTD 4.5 HP single stage snow thrower
Snapper 3 HP single stage snow thrower
Yardman 5HP two stage snowblower

Replies: 4 - 11 of 11

All

View as Outline

jogo

Location: Westchester N.Y.
Joined: Sep 8, 2003
Points: 463

Re: installing Shear pins
Reply #4 Jan 3, 2005 10:57 am

Prob. just a washer use them against the nut.

This message was modified Jan 5, 2005 by jogo

Red Max EB78001 blower
Echo PB1000 blower
Sears ? blower
Sears 16" chainsaw
John Deere STX38
Murray 21" push mower
Echo SRM1501 weed wacker
Excell/Honda pressure washer
Ariens 11528

Emmo

Joined: May 22, 2003
Points: 1065

Re: installing Shear pins
Reply #5 Jan 3, 2005 10:59 am

JOGO, OGO is that YOu? Congrats on joining us!

Marshall

As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: installing Shear pins
Reply #6 Jan 3, 2005 11:02 am

If that's OGO, welcome buddy!

If it's not, still welcome!

mml4

Snow is good,
Deep snow is better!

Joined: Dec 31, 2003
Points: 544

Re: installing Shear Bolts
Reply #7 Jan 3, 2005 11:36 pm

I just greased the auger shaft on my unit according to the assembly manual. The manufacturers recommendation is to remove the shear bolts,grease the zerk fittings,spin the auger sections and reinstall the shear bolts. They required 11ft.lbs of torque on the shear bolts. If you over torque the shear bolts when installing them (too tight) they will protect NOTHING!!!

Marc

SnapperV210P,Toro22177,TroyBilt42010Snowthrower,Craftsman Shredder,American Turbo Pressure Washer HondaGX200,Stihl011Saw,EchoPas260Trimmer Edger,EchoPB602Blower,EchoHCR150Hedge Clipper

jogo

Location: Westchester N.Y.
Joined: Sep 8, 2003
Points: 463

Re: installing Shear pins
Reply #8 Jan 4, 2005 7:06 pm

Yep.... I am OGO. Chris helped me out to got me signed up. Ya see, ya can all RUN but ya can't hide from me!!!

Thanks for the welcome!!!!!!

Red Max EB78001 blower
Echo PB1000 blower
Sears ? blower
Sears 16" chainsaw
John Deere STX38
Murray 21" push mower
Echo SRM1501 weed wacker
Excell/Honda pressure washer
Ariens 11528

navihawk

Joined: Jan 17, 2003
Points: 1318

Re: installing Shear pins
Reply #9 Jan 4, 2005 7:27 pm

The collar goes on the bolt first,then the bolt goes thru the shaft,then the nut.

SnowPro

Location: Sault Ste. Marie, Ontario, Canada
Joined: Mar 16, 2003
Points: 395

Re: installing Shear pins
Reply #10 Jan 5, 2005 11:03 am

The collar goes on the bolt first,then the bolt goes thru the shaft,then the nut.

Yup!

Mainly, it's a spacer to cover different sizes of shafts. The shear bolts are not always threaded completely.

Ken

jgreen

Joined: Sep 9, 2003
Points: 149

Re: installing Shear pins
Reply #11 Jan 5, 2005 1:05 pm

that makes sense. With out the spacer you wouldnt be able to tighten down the nut on a very narrow shaft.

thanks for the help

John
Scotts 21" self propelled mower
MTD 4.5 HP single stage snow thrower
Snapper 3 HP single stage snow thrower
Yardman 5HP two stage snowblower

Replies: 4 - 11 of 11

All

View as Outline