Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

As part of my latest OPE Madness,   I've been thinking about a backpack blower. It seemed to me that a handheld would become tiresome on the arm if used for an extended period of time and a backpack would fit the bill. While in HD today I came across an ECHO 40 cc reconditioned blower that was laying on the floor unopened. I never tried one on before and thought, what the heck. Man, I was suprised at the weight and how it felt. I found as I walked around with it that I was bending forward to counter act the weight of the blower. This in itself seems like it would be tiresome.  Now I admit, I'm only 5'4" and 144 lbs, but I'm no weakling. I liked the idea of a backpack blower, but not sure if thats the direction I want to go in now. Any opinions or suggestions as to a lighter machine or alternative are appreciated. I figure at worst if I buy one, I could hook up a dual tube to the back and fly around the neighborhood.

                                                  Thanks,  Kevin

I have a BP200 and it BLOWS too

Hi Brian. So I guess the Echo's really blow. Sometimes they suck. Hows yours for extended use?

I had a handheld blower and gound it very tiring after not too long.  Wasn't crazy about the vibration either.  I finally sold it at a garage sale and have been looking for a backpack blower since.  The one I wanted was teh Echo PB360L with the separate throttle arm but couldn't pass up the bargain on the Husqvarna 145BT I picked up a week or so ago.  I have yet to use it, or for that matter try it on (I will post when I finally do use it).

There are a number of backpack blowers out there and I'd imagine their comfort is a fucntion of not only the weight but as is the case in using a backpack for hiking, the placement of the weight and the design of the straps.

When I see the local professional lawn care companies, they typically don't use the backpack blower for more than cleaning up which doesn't take all that long so I don't see comfort as a big concern to them.  They want reliability and power to get the job done and get it done quickly.  If there are large areas to clear, they tend to use walk behind blowers and fihish up with backpacks.

I guess you need to consider how long you will be weaing it as well as how it feels when it's on.  If you plan on using it for an hour straight, I'd still rather be carrying the weight on my back than holding it in a hand.

Also, don't just look at MPH.  CFM really tells how much air the machine will move.  Theoretically, you can get air blowing 250 MPH out of a straw but it won't move that much material.

LL

I have the Husqvarna 225B hand held. I have two yards that have long drive ways and sidewalks  I have never had a problem with the weight.

we sold a couple of the 60 cc husky back pac blowers and i tried them out of course.

well if i could have strapped them both on at once and gotten the right nozzle im sure i could have launched myself.

they really do have some power.

if i was going to purchace one i would consider that its not so much the weight of the thing on your back for a couple hours ...its the controling the nozzle end for that much time ...its pushing against you with considerable force and you are holding it trying to maintain some control .

the weight on your back that is pushing you foreward is counteracted by the the blowing of the nozzle.

i know it sounds stupid the way i try to explain it but just think about it a little .

later chris  

Chris,

Sounds like you've achieved spacial equilibrium!

LL

Kevin, good question. My ES-2400 (23.9cc) has a steel impeller but the model below it didn't. This was about 5 yrs ago, the current models, I'm not sure about.

Vangellis wrote:
Seems good so far. I used it today and was really hard on it...it  was about to rain and I wanted to get done. I left the throttle wide open for much longer than I like too. No problems. I really like this little machine.

Well, this is what I own...Please Click Here I have owned that blower for at least 2 years now and it works great. Here is my review...Please Click Here

Well, it's a moot point now. I just picked this up on E-bay and think I got a good deal. New in box, not reconned, $133 and $15 shipping. It may be the smaller unit at 25 cc, but it's only 13 lbs. It should take care of most of what I have to do. I wasn't planning on getting one this morning, But the price was at $102 this morning and that caught my eye. I've seen them go for $180-$219. So at that price, what the heck. I'll be sure to let you all know how it does. My wife is out of town but called when I was placing my bid and was cool about it. Man, shes got something up her sleeve for me.  LOL  OPE Madness strikes again.
                                                                                                                                     Kevin
Husqvarna 125BT

125BT

	Cylinder displacement	1.6 cu.inch / 25.4 cm³
	Power	0.95 hp / 0.7 kW
	Cylinder bore	1.3" / 34 mm
	Maximum power speed	7800 rpm
	Maximum recommended engine speed	7800 rpm
	Type of carburator	Walbro
	Air speed	116 mph / 52 m/s
	Air flow in housing	10.9 m³/min / 384.9 cfm
	Air flow in pipe	8.8 m³/min / 310.8 cfm
	Fuel tank volume	1 US pint / 0.5l
	Fuel consumption	690 g/kWh
	Vibrations idling right handle min/max	1.2 m/s² / 1.2 m/s²
	Vibrations top speed right handle min/max	1.2 m/s² / 1.2 m/s²
	Sound level, min/max	92 dB(A) / 92 dB(A)
	Sound level at 15 m (ANSI B 175.2)	67 dB(A)
	Noise emission, LWA	102 dB(A)
	Weight	13.0 lbs / 5.9 kg