Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Maintenance on shop equipment

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
spottedpony


Joined: Aug 23, 2004
Points: 301

Maintenance on shop equipment
Original Message   May 4, 2005 10:46 am
We're at the time of year everyone is getting, or has gotten, lawn care & other summer equipment readty  for another seasons use.  Remember the maintence on the tools and equipment used to maintain and repair the outdoor equipment. Hand tools should be kept clean and free of grease. Grind screwdriver tips so they are sharp & not worn. Keep edged tools sharp, repair  or replace damaged extension or tool cords, or cord ends (this applies to air hoses too) keep air tools oiled & dont forget routine maintence on air compressors (these are often the most neglected shop tool) clean or change the air filter on compressors, & make sure cooling fins, lines etc. are free of oil and dirt buildup  for effecient cooling. adjust belts. check & change the oil in compressors as recommended by the mfgr. & use the proper oil in them. most compressor mfgrs  recommend "compressor oil" or 30 wt non detergent oil. & multi weight automotive oil is not recommended, (quote from a deviblis manual: multi-viscosity motor oils such as 10w30 should not be used in an air compressor, they leave carbon deposits on critical components thus reducing performance and compressor life)  dont forget to open drain valves on compressor tanks regularly to prevent excessive moisture buildup in tanks & lines. & above all else keep the work area clean & clutter free.
Replies: 6 - 9 of 9Next page of topicsPreviousAllView as Outline
AJace


I have an Ariens 926 Pro because I like Orange



Location: Near Gettysburg
Joined:
Points: 969

Re: Maintenance on shop equipment
Reply #6   May 6, 2005 11:11 pm
Very nice Brian.  Did you get a deal on those kitchen cabinets or did you just get them for looks?  I like to have more area in the back on my workbench so I can set some of the things I need.   
This message was modified May 6, 2005 by AJace


Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: Maintenance on shop equipment
Reply #7   May 6, 2005 11:13 pm
Damn Brian, you're more obsessive than I am, you could eat of that floor. I'm impressed! Looks nice!
Termy


Location: Washington
Joined: Oct 24, 2004
Points: 960

Re: Maintenance on shop equipment
Reply #8   May 6, 2005 11:21 pm
There is a point when you can go too far and have a shop too clean. It looks like a Woman lives there lol


Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: Maintenance on shop equipment
Reply #9   May 6, 2005 11:24 pm
Better watch it termy, you're going to be eating those words soon. (Paula)
Replies: 6 - 9 of 9Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.