| Name |
Mike |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
|
|
| Personal Quote |
|
|
| Privileges |
Normal user |
| Rank |
|
| Points |
5 |
| Number of Posts |
5 |
| Number of Reviews |
0 |
| Date Joined |
Feb 19, 2011 |
| Date Last Access |
Mar 24, 2011 5:24 pm |
|
 |
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
#1 Mar 23, 2011 6:23 am |
|
Just installed the new belt from Napa. Original belt was 37 1/4" long and to accomadate the larger pulley went with a 39" belt so a 5L390W works well. Now just need the part #'s for the larger pulley/belt cover and bearings for the auger....
|
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
#2 Feb 20, 2011 6:29 pm |
|
Thanks Guys...I hate guys like that! I am waiting on a new belt to come in and I measured the old one which was tight, 37&1/4" so I ordered a 5L390W which is a 5LK390 heavy duty to try which should be 1 3/4" longer to see if it fits OK. I may have to go to a 40" (5L400W) but it's only less then $20 so I'll give it a try. Would be nice to know what the belt for the kit is suppose to be but Oh well, trial and error. I'll figure it out!
|
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
#3 Feb 20, 2011 5:32 pm |
|
Edgenet, I'm not looking for criticism just info so your opinion is neither wanted or valid. Besides, the "engineers as you put it" made the high speed impeller kit and they are engineered for some of the husq models of the same hp which they feel IS enough to handle it. We're not talking about a 6hp here, more like double that and years ago a 8-10 hp with a 30" cut was doing the same so a 13hp+ will have no trouble carrying the extra load. I'm working through with a solution! If you don't want to do it to your machine that's your choice...Here's your 2 cents back!
|
|
|
Re: Does this Hi Performance Impeller Kit Part# 532187724 fit my new Husqvarna 15530SB-LS?
#4 Feb 19, 2011 7:21 am |
|
Hey Guys, Sorry it's a bit late and I'm new but I have to ask. I was reading this thread and inquired at the Husq dealer about the high speed impeller kit for my rebranded Husq ( Craftman 13hp30 model # 944-526800 ). It came with a pulley only and the dealer said he had changed many but didn't need to change the belt nor did it come with a belt in the kit. So, I went home and changed it but found it to be too tight on the idler, really tight actually. So, I would like to know what belt is suppose to fit this application. My old belt is a 5/8" x 37 1/4" and I am chasing a replacement. Could anyone point me in the right direction. Also is this the cover you installed to get your desired clearance? I copied this from your post... http://www.m-and-d.com/AY-409161.html?id=n79iL6TA&mv_pc=122
|
|
