| Name |
paul |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
|
|
| Personal Quote |
|
|
| Privileges |
Normal user |
| Rank |
|
| Points |
5 |
| Number of Posts |
5 |
| Number of Reviews |
0 |
| Date Joined |
Jan 23, 2008 |
| Date Last Access |
Jan 24, 2008 2:29 pm |
|
 |
Re: toro 824
#1 Jan 24, 2008 2:06 pm |
|
It was the spring. Thanks a lot Marc and Don
|
|
|
Re: toro 824
#2 Jan 24, 2008 11:09 am |
|
with the machine tipped on to the auger,there is 4 bolts to take off,you will see the friction wheel,your tires are connected to a axle,on that axle should be a shear pin,either left or right hand side,if you see a hole and no bolt ,thats your problem,just fixed one yesterday.hope this helps you out. Great description but that was not the problem. Thanks again.(any other ideas?)
|
|
|
Re: toro 824
#3 Jan 23, 2008 5:17 pm |
|
with the machine tipped on to the auger,there is 4 bolts to take off,you will see the friction wheel,your tires are connected to a axle,on that axle should be a shear pin,either left or right hand side,if you see a hole and no bolt ,thats your problem,just fixed one yesterday.hope this helps you out. I'll check that out, thank you very much!!
|
|
|
Re: toro 824
#4 Jan 23, 2008 4:50 pm |
|
do you have a shear pin in your axle?if so check it. excuse my ignorance but where would it be located?
|
 |
toro 824
#5 Jan 23, 2008 4:33 pm |
|
My toro's wheels have locked up, Everything engages correctly but the gears won't turn. Any ideas? Thanks in advance
|
|
