Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides
Abby’s Guide > Vacuum Cleaners > Discussions > Miele canisters - How much of a different is the powered nozzle?

Vacuum Cleaners Discussions

Search For:
vacuumdesirer


Joined: Feb 14, 2017
Points: 1

Miele canisters - How much of a different is the powered nozzle?
Original Message   Feb 14, 2017 1:24 am
I've been coveting a Miele C3 Kona or Marin now for about a year. I discovered them through the Wirecutter reviews. I have a vacuum today that... gets the job done... but it's a budget upright. I would love to have a quality canister vac instead. My question revolves around the electrobrush models. My gut tells me that, if I am to invest in a Miele, I really ought to just get a powered hose model, and a SEB 228 or 236 at that. Otherwise, it would just be an uncomfortably expensive vacuum cleaner with none of the high-power performance. Is the electric beater bar really "make-or-break" in that way, as far as Mieles are concerned? The jump to even the cheapest model to include the 228 is a good couple hundred dollars. And my beloved C3 Marin is over $1,000... I received a $500 Amazon gift card, and am considering putting it all towards this. I would love to be OK with an entry-level C1 model with a non-electric brush, but something is telling me that's a bad idea. Can anyone who has experience with both comment on how vital it is? Thanks!
Replies: 6 - 6 of 6Next page of topicsPreviousAllView as Outline
CountVacula


Joined: Dec 25, 2014
Points: 278

Re: Miele canisters - How much of a different is the powered nozzle?
Reply #6   Sep 13, 2019 11:00 am
I recently had an opportunity to pick up a very lightly used Miele Compact C2 that came with the SEB228 power nozzle. Only $20 at a thrift store, who could resist? It cleaned up to as-new condition. I measured both suction and airflow at the hose end. Airflow was very high, registering a tiny smidge below the 9 line on my BAIRD meter. That is about what a new Kirby would show if you made the sales person test it at the hose end instead right at the hole in the fan housing. Suction didn't get much past 64 inches of water lift and that seems to be due to a suction release built into the bag indicator. I have seen this with other new Mieles. Attachments are tiny, especially the cupcake sized dusting brush. They are almost useless and that dusting brush especially so. Perching them on the canister end of the hose often causes them to foul the hose and tip the whole vacuum over on it's side. The hose material is nicer than that on my older S558 Silver Moon but it's still a short six foot long hose compared to the eight footers a high end Kenmore has or the 12 footer you can buy for a Tristar. Sound level of the canister is low average but the SEB228 makes some unpleasant noises on dense carpets. The motor struggles to spin the brush on the back stroke on some dense carpets in my home. The height setting seems critical, too low and the overload protection engages. None of my Panasonic or Kenmore power nozzles, or old Hoover Quadraflex power nozzles have any problems with the same carpets. The Hoover and older Panasonic Jet Flo power nozzles don't have height adjustment and it doesn't seem to matter. So I remain unimpressed with Miele vacuums. My trusty old Panasonics and Kenmores with their longer cords and hoses and superior power nozzles are a lot less work to use. Oh yeah, the Miele dust bag is both too small and ridiculously over priced. Figure using a $5 bag every week, maybe more often. They are almost the poster child for why so many buyers choose a bagless machine.
Replies: 6 - 6 of 6Next page of topicsPreviousAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42