Vacuum Cleaners Discussions

My 4 yr old Hoover WIndtunnel Supreme gave up the ghost two weeks ago with a whisp of smoke out of the side side vent. Nothing jammed in the roller or got sucked into it, the motor just burned out according the certified Hoover repairshop. Great suction on that vac, but it was made out of cheap plastic and obviously the internals were just as cheap.

Anyway, I am now back to finding a quality vacuum that will last a long, long, time. An ad came up in a nearby Craiglist for an Electrolox Prolux unit for $50. I made the 40 minute drive to pick it up and I am impressed by the heavy duty, utilitarian, Swedish design. Definitely not a flashy device intended to impress your friends. It is the 8.5 amp version and does a seemingly equal job of cleaning even though it feels like it has half the suction of the 12A Hoover. I can't seem to find any information on this particular model anywhere on the internet so far, although Electrolux's designs don't seem to have changed much over the last few decades.

Does anyone have any idea how old this thing is and if it needs any type of annual service? Is it any good? Is the 10A version far better?



Two quasi-local ads (30 min & ~1 hour drive) came up for a $70 Filter Queen D 88 (w/ all accessories and extra filters)in seemingly excellent condition.
Anybody know how old this model is and is the power head the newer type that is supposedly better than the older versions?



The other ad is for a 10 yr old FQ, but they do not know the model version. They want $50 and I am headed to check it out right now. They say the power head "works great". I'll post a follow up pick after I get back. I think I'll get this one if it is in good condition and also consider the D 88.

Any info greatly appreciated.

Thanks for the advice, Procare & Venson. A new roller brush on the Electrolux might actually go a long way to improving performance. I checked the bristles and they still show some clearance(~1/8") beyond the bottom of the head unit, they may not have the same rigidity to properly agitate the carpet. I wish I had another vac around to see if it is leaving any dirt behind, but no such luck.  That will have to wait until I get the D 88.

Procare, if you have a copy of the manual, I'd love to hear some specs or what it has to say. I've tried removing the roller brush by taking out the 4 screws on the bottom, but the bottom plate doesn't want to come off(easily). I'm not exactly sure how to wedge it off without damaging anything. Any insight onto that would be greatly appreciated so I can find out which brush roller to get.

Also, I checked out the "10 yr old" Filter Queen and that description was generous, to say the least. My guess would be closer to 20 yrs(or more) judging from the style and wear & tear. I decided against getting it because the accessories were pretty thrashed. Even if the cannister had stayed the exact same over decades, the cost of eventually replacing all the other stuff made it a no-go. The picture below, that I found on the internet, seems to be the exact same model and period of time.

Here is a web site for a vacuum parts supplier with an extensive array of schematics for all FQ models, P/N's, and FQ parts listings.  I'm not affiliated with the company and/or its people and business operations.  I don't make any testimonials for them.  Just providing the site here to you as a reference and source of FQ information.

http://www.hescoinc.com/vacuum_cleaner_parts/filterqueen.html

Carmine D.

CarmineD, that's a great website! Thank you for the tip.

Well, I vacuumed my apt a second time with the Electrolux and I have to admit, it does a damn good job. It had a brand new bag yesterday and with this second pass, the bag is half to 3/4 full. It's been 2 weeks since a last vacuuming, and I did get under the coach and bed...Still, this thing is impressive. Who knows how much better it'll get with a new roller brush?

Btw, when I went to check out the Filter Queen today, I have to admit I was startled by the size of it. I kept reading in reviews and posts here about how some people were having a tough time emptying it and how heavy it was, so I was expecting something the size of a shop vac. I am impressed that something that small can do what it does. I think I'll still keep my out for a good deal on a newer FQ. The longer hose and greater suction would really come in handy for cleaning my car.

Did you end up picking up one of the two Filter Queens? I have a D31X, which is what you seem to have pictured in the second picture you posted, and they are AWESOME machines; VERY quiet, VERY powerful ( I would say near Miele/Dyson suction, and with the right filters VERY good filtration, if not excellent). FQ's are def. some of the best canisters out there. Bar non.

Moebius wrote:

My pleasure.

Carmine D.

Hertz wrote:
Not yet. The D31 looking unit was $50, but the accessories were in somewhat bad shape. The hose would have needed replacing and some of the ends were beat thrashed. So, the vac itself was a steal, but by the time I replaced everything else...

The D 88 is a solid hour away without traffic, and up to 2 hrs with. So, it is only possible to get there on weekends. After being misled about the condition of the last one, I'm really not up for that long of drive to find another beater. So, I am waiting on more high quality photos of it.

Out of obsession and a bit of excitement, I've vacuumed every inch of my apartment with the Electorlux twice now and have to say I am really impressed! I can't wait to see how it does with a new brush roller. I've never used a sealed vac before - there's none of that "vacuuming" smell in the air while running it. Even the Hoover, when new, did that. With the Electrolux, no smell at all.

Well, there just happens to be a true Electrolux shop just 15 minutes from my house. Found out my Prolux is approx. 15-20 tears old, the shop guy was really impressed with the condition it was in.  He gave a a complete look over and guessed that the roller was probably 10-15 years old and needed replacing. After seeing a new roller and brush bristles, i couldn't argue. He also said that the roller bearings needed replacing as they were the same age and might as well do the gear/roller belt while in there.

Anyway, we started talking about a full service with replacing the brush roller & bearings($50), drive belt($13),   fix/seal the top that locks the bag into place, replace the hose between body and power nozzle($20), but mostly to re-core or replace the the brushes in both motors and make improvements to substantially improve rpms of the brush motor and the vacuum motor.  $260! But, he said it would be good for another 10-15 yrs at least and came w/ a new 2 yr warranty.

I think he saw the sticker shock in my eyes and said, "or you can do a few things yourself". So I got the roller, bearings, and belt. He also showed me how to seal the areas that were likely loosing vacuum. So, I'm just waiting for the silicone to dry before giving it another test drive. I think this thing's a "keeper" after seeing that the current Pro Commercial model is exactly the same with just a few cosmetic changes of moving the on/off button, adding a looped handle, and a full bag/jam sensor light. Other than that, he said the new model has probably 30-40% more suction simply because electric motors have become far more efficient and powerful in the ensuing years. but, he said overall performance between the two would be very, very, close. Not bad considering the new model sells for $1,100-1,200.

Moebius wrote:

In fact I'd say a good purchase decision.  Congrats.

Carmine D.