Vacuum Cleaners Discussions

A really cool insight to the workings behind the company and how they develop what I believe to be some the most well designed vacuums with overall good-great build quality in history.

Venson wrote:

Hi Venson;

In the likely/unlikely event that Sir James moves production of dysons from Malaysia currently to say........... Pakistan, this yacht would be the ideal mode of transportion to do so.  For workers who want to go and the whole kit and kabudle of dyson production.  Accomodates 358 plus a crew of 50. 

Carmine D.

CarmineD wrote:

Thanks for proving my point and disproving yours. You have said time and again "Dysons are just like any other cheap bagless machine" - which break down easily, have *TERRIBLE* filtration, and clean like poo-poo except for the multi-cyclonic COPYCATS. So yeah, Dysons are WORTH THE MONEY, when you say they're OVERpriced. Not. You are now starting to make sense, haha.

Hertz wrote:

You have not paid full price for your dysons and not purchased any new.  Just bought yours off the junk heap at junk prices.  To make a statement that they are worth the money means that they are worth their prices purchased when new.  You never bought any new dysons, did you?  I have bought both new/used dysons and received several free for extended times to use.  If you sincerely felt dysons are not overpriced and worth the do re me, you'd buy one/more new at the new prices and then make such a statement.  You didn't.  You don't believe based on your actions that dysons are worth the money, except junk prices.  As the saying goes..........put your money where your mouth is.

Carmine D.
 

CarmineD wrote:

Again you seam to say complete NONSENSE and sometimes near BS just to make you happy; I bought them at "junk" prices (just like there are Miele's and Electrolux's available for "junk prices everywhere buddy, open your eyes) to make a PROFIT; they are COMPLETELY worth the money new, however I could not only make one to like-new condition, but I could also make a profit; given that was the smarter choice, I did so. You say we live in economically tough times; if I found an HIGH quality machine for CHEAPER, why would I spend more? They are still worth every dime and sometimes then some new, but because I have the skills to rebuild them, I might as well buy them at lower prices, and do the work myself. Anybody with any sense of intellect and appreciation for working on quality engineering would have done the same. Stop being so clouded by your humorous vendetta against Dysons and the genius himself.

Hertz wrote:

My eyes and sense tell me you can't find/buy a dozen MIELE/SEBO vacuums on the junk heap for junk prices.  Just dysons. That makes dyson different.  Maybe you can find a few junk Eureka-Electrolux's.  Not a dozen in one buy let alone multiple buys.  Again, dyson is different.  Not better.  Different.

Words are cheap.  With words you can do anything.  Actions speak louder than words.  12 junk dysons at junk prices to rebuild and resell may be worth it if you have nothing better to do.  If you are looking to capitalize on the dyson fad and are disingenous, you'd buy junk dysons to sell at high prices.  You'd hype and hawk the merits of the brand too just like you are doing.  I'm not.  I won't.  I'm different from you.  Better?  I'll let others judge. 

Carmine D.

Hertz wrote:

Silly, funny and incorrect.  Having purchased and registered my new dyson DC07 in September 2006, I am on the dyson email list and receive messages about new products and launches.  Having experienced problems with the floating dyson head and clutch on my rugs, and working unsuccessfully with the dyson call center to find a work around, I emailed dyson with my concerns.  At the time I forwarded the email along with the picture of my new dyson to a poster here who sold new dysons.  Dyson responded back to me within 24 hours that it would consider my comments which it appreciated receiving and forward to its engineer department for future product consideration.  Exact words.  I emailed that response to the poster here who sold dysons.  I have no doubt that Sir James after going on record many times saying manual rug adjustments are not necessary changed course in part to emails like mine and others received over time from users unhappy with the clutches and floating heads ojn their carpets.  In June 2009, dyson launched its DC28 with rug manual settings rather than self adjusting floating head. 

Carmine D

CarmineD wrote:

You like to manipulate reality to fit your own whiny, silly little world that Dysons are "junk." When they're not MAINTAINED, you're going to have problems. It just so happens that such a high quality machine such as this was in the hands of people who didn't know what they were doing. There is no "junk" price; just a low price, yet you like to hug that word just to make you feel safe and secure. Maybe one day you'll open your eyes and not be so hilariously biased and stop denying the truth. Until then, enjoy not believing facts.

Hertz wrote:

It's only natural that junk dysons would spawn junk dealers.

Carmine D.

Hertz wrote:
How do you feel you have the right to qualify that Dysons are not junk though, Hertz? By buying up 12 models that have a few scratches, have had "obvious" abuse yet still turn over the moment they're switched on? You could say that about any vacuum cleaner that is sold in such a way! I've even seen old Sebo uprights sold on palettes of 5 that either need new drive belts fitted or tools which have become lost over time and thus you could easily if you wanted to, make a bit of money as a private seller selling off old vacuum cleaners at capped prices.

I've raised this issue before and I'll raise it again - Maintenance - how do YOU define maintenance? If people are ignorant about filter care its because of the Dyson mantra that their models are "lifetime," and have often been advertised as so. Owners don't bother checking the filters, or cleaning them believing that the suction design does that for them. This is why there are so many parts for Dyson on EBAY where the filters are concerned - not about making money - but supplying an OBVIOUS spare part that seems to break down more than often. Oh I know - Ive met some owners whose ignorance goes on without belief. Ive met many owners who wash out their filter cones but don't dry them expecting the vacuum suction to magically dry the filters, then problems happen and they don't realise. So whose fault is it that the Dyson has failed? The owners? Or the marketing that has led them to jump to such conclusions?

What most owners dont realise is that when they buy a Dyson for the first time and then go around the home with it to see if it picks up, the machine will pick up dirt that other vacs have left behind and owners naturally assume the vacuum will just fill up quite the thing until dust starts to compact the whole bin. SOME owners I know just leave the bin and don't bother emptying because they take the 100% suction principle too far! Is this a problem of ignorance for owners or just one of poor maintenance? Then what happens is that things start to clog, filters start to get over worked, parts start to FAIL.

Oh and by the way, Ive owned the DC25 for 6 months. I couldn't stand it. Poorly made with handles that didn't feel as if they were locked down, a push button that kept sticking and sometimes wouldn't function and that Ball that continually got in the way for cleaning under low furniture. Good performance maybe but build quality and design let it down in my eyes. I have a right to thus make judgement. You have a right to make your own judgements but clearly you're not prepared to discuss other avenues. Just wait until your Dysons fail again, no matter how experienced you are in repairing them.

vacmanuk wrote:

I know everything about a Dyson in and out - if they fail (which, unfortunately, half of them don't turn on but their filters were so clogged due to poor maintenance most likely their motors burnt out) then given Dysons QUALITY design and intelligent layout, one can very doable user-replace the motor and/or brushes. The motor unit housing the non-ball ones (and even the ball ones) is higher quality, higher grade plastic and VERY high quality seals that alone is better than half the china junk, JUST THAT PIECE probably has overall more dense plastic that china-specials, at least quality wise if you can even quantify such a measurement, but my point is the same none the less.