Vacuum Cleaners Discussions

Hoover Recalls Upright Vacuum Cleaners Due to Fire and Shock Hazards U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 27, 2010 Release #10-248 Firm's Recall Hotline: (888) 891-2054 CPSC Recall Hotline: (800) 638-2772 CPSC Media Contact: (301) 504-7908 Hoover Recalls Upright Vacuum Cleaners Due to Fire and Shock Hazards WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product. Name of Product: Hoover(r) WindTunnel T-Series(tm) Bagless Upright Vacuum Cleaners with Cord Rewind Feature Units: About 108,000 Importer: Hoover Inc., of Glenwillow, Ohio Hazard: The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord to be pulled loose. This poses fire and shock hazards. Incidents/Injuries: Hoover has received three reports of minor burns to carpet and furniture and one report of a minor burn to a consumer's hand. Description: This recall involves Hoover(r) WindTunnel T-Series(tm) Bagless Upright vacuum cleaners with the cord rewind feature. This feature enables the cord to wind inside the vacuum for storage. The following model numbers and manufacturing codes are included in the recall. Model Numbers / Manufacturing code ends with... UH70110 UH70120 / HO9A O9A UH70200 UH70205 / JO9A KO9A UH70210 Vacuums with the manufacturing code KO9A followed by a green dot are not included in this recall. Vacuum cleaners with the cord rewind feature sold after November 2009 and with any other manufacturing code are not included in this recall. The model number and manufacturing code can be found on a label on the lower rear part of the vacuum cleaner. Sold at: Mass merchandisers, department stores and independent vacuum retailers nationwide and online from August 2009 through May 2010 for between $100 and $160. Manufactured in: Mexico Remedy: Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover for a free repair. Consumer Contact: For additional information, contact Hoover toll-free at (888) 891-2054 between 8 a.m. and 7 p.m. ET Monday through Friday, or visit the firm's Web site at www.hoover.com/tseriesrewindrecall To see this recall on CPSC's web site, including pictures of the recalled product, please go to: http://www.cpsc.gov/cpscpub/prerel/prhtml10/10248.html

M00seUK wrote:

Then, let me backtrack and restate my conclusion which differs from yours.  For years Sir James Dyson was mislead about the importance of manual rug height adjustments.  He was mislead because he concluded they were not a priority for most people.  Rather than eating into his profit margin with their inclusion, instead he gave buyers ONLY a self-adjusting floating head nozzle.  Lo and behold sometime before June 2009, Sir James had an epiphany about the matter and reversed course in his thinking on manual rug height adjustments. So he added them to the DC28, which retails for $599 an increase of about $100 over the typical dyson upright up to that time.  I conclude from this occurence that:  If Sir James Dyson believes/feels the feature is a priority [either rightly or wrongly] he builds it into the product without concern for profit because dyson prices the product upwards for its inclusion.  Cost is not the issue for the feature's inclusion.  Something else other than the increased cost that will diminish his profit margin [as you claim] is the motivating reason for its inclusion. 

Carmine D.

Venson wrote:

Hi Venson:

On the subject of cord winders, I believe Sir James Dyson's statement that they are problematic and hence unworthy of inclusion is just a misguided excuse for not offering them on his upright models.  Just as was his excuse for not including the manual rug height adjustments which he reversed course in June 2009 with DC28.  And upped the MSRP.

Carmine D.

But they are problematic on older machines. I've worked on several Panasonic uprights that had auto cord rewinds and the company copied Hoover UK in the 1980s by fitting the auto cord rewind at the top recess just above or below the carry handle. Panasonic got so fed up with recalled vacuums that they stopped auto cord rewinds on their 1990 vacuums. Physically by design if a motor that rewinds a cable from the floor upwards all the time at the end of cleaning, its no wonder that the weight and pull of the plug and associated cord weakens the mechanism over time. The Mach 6 in the UK (by Vax/TTi) and the old Vax VX series have auto cord rewinds located at the bottom which is a much better thought out idea. Still, though it is something that is "another thing," like to go wrong over time.

Carmine - I had no idea that Dyson fitted a manual adjuster on the DC28. How does it work? Does it follow the standard that there are selective notches/dial style that the owner can adjust themselves to different carpet heights or something completely different?

vacmanuk wrote:

From the dyson web site:

vacmanuk wrote:

With the HOOVER cordwinder recall, the issue was the leads inside the winder pulling off/apart with user pulling too hard.  Not the plug.  Since 2005, the HOOVER bagless Elite Rewind upright, which sells for $90 to $110 by most retailers now in US, has used a cordwinder without any problems/issues based on my reading and research.  The complaint/issue most often cited with the HOOVER Elite rewind is the cord length, called short by some at 24 feet, not its mechanism.  At the current price, it is a budget model that is a popular seller among most US retailers.  No cord rewind problems so far after 5 years of sales to my knowledge. 

Carmine D.

Interesting about the Dyson but as you know I've never gone past the DC07..

Regardless of cord winder problems most brands just won't go there with auto cord rewinds in the UK. The reason being that they think the mechanism will break and SEBO also have the same feelings. Much as I'd love an auto cord rewind on my X1.1 and X4, with the daily abuse the existing cord gets anyway, I doubt that any auto cord rewind would stand the length of the machine's long lasting ability. Electrolux have started putting a cord rewind on the back of their latest uprights the "@ease" models, the same models the U.S have had for some time:

vacmanuk wrote:

The Electrolux lightweight Intensity bagged upright from 2005, and still sold today, uses a cordwinder.  From what I hear and see, the winder feature works well.  The model is now sold at budget prices too in the USA about $100.  I disagree with you on the feature's inclusion.  IMO uprights will start, already have, to move toward cordwinders.  The latest is the new LG Kompressor.  Many canisters already do.  Why should consumers feel different for them on uprights?

Carmine D.

CarmineD wrote:
I guess its personal choice. Could you imagine an auto cord rewind on an Oreck? Would they be able to tie it in to match the current weight or do you think it would adjust the total weight? This gets me thinking about a few things, namely brands that I'm aware of who aren't out to make life easier for the consumer. Dont know about the U.S but in the UK we are having to suffer with a few things that could make life easier? Why don't all uprights have the following features, for example such as:

* Long hose or a hose that compacts into itself like the Miele hose extender idea on their cylinders, thus not having to whip out an extendable longer hose that has to store somewhere else each time you are required to clean?
* Auto cord rewinds.
* Brush on / off control (only high end models like TTi, Miele, Sebo have them)
* Free spares like filters and belts. Nothing worse than having to buy a bagless cheapie only to find that there are no spare filters or belts.

This week for example I've tested a TTi inspired upright in the form of a high street goods shop (Argos) with their own Argos Value bagged upright. It is based on a Vax model but it may well appear in the U.S under a different brand any time soon. It is very plasticky although it does the job very well whilst remaining lightweight. So you can imagine the fun I had when I found 6 screws in the box it came in. Since the price was so cheap *and unheard of around £37 (currently $56.13) you can imagine the fun I had having to screw the bin assembly to the main motor, then the clip on tool attachment had to be screwed in, then the handle had to be screwed in and then finally the top cord wrap/carry handle. Took me the best part of 15 minutes and a tiny crosshead screwdriver. The MECCANO idea of building a vacuum didn't impress me much having to put screws into get the thing going!!!






Now the ONLY thing that this came with was a couple of free dust bags. The Bagless version however came with a spare filter.

vacmanuk wrote:

Not with the current US ORECK gauge cord which meets OSHA requirements for commercial grade.  Too wide for winder use. 

Carmine D.

Latest on HOOVER Recall's

http://www.walletpop.com/2011/02/09/hoover-vacuum-recall-can-short-circuit-catch-fire/

Carmine D.