Vacuum Cleaners Discussions |
|
Hertz
Joined: Jan 31, 2010
Points: 199
|
|
Re: Kirby Sentria
Reply #24 Apr 11, 2010 2:21 pm |
|
Hertz, Any honest repairman will tell you the only difference between Sentria and any other G series is not the suction but trim , bags, electronic switch for attachments and LED circuit board for headlight and brushrolls. The belt for power drive changed in 2005. The armature and fiield coils, and everything else in the motor is the same. No change in perfornance. I have worked on and checked all the G series and found no difference in suction. Procare Read through the link I sent you; the Sentria has more suction and airflow than any previous iteration. Marginally, but it's there.
|
retardturtle1
Joined: May 16, 2009
Points: 358
|
|
Re: Kirby Sentria
Reply #30 Apr 13, 2010 2:02 pm |
|
Hertz, I still disagree with what you read. The cleaning performance proclaimed by GreatVac about Kirby, is not a better performing motor which is the same on all Generations but the brushroll. Kirby changed on the G-5 on to Sentria the brushroll . Instead four 6" rows they went to eight 6" rows. The bristles are thinner and stiffer. They give a little better performance than previous brushrolls in cleaning and this is the only change made to enhance performance. According to an old Kirby Distributor. procare
You nailed it......once you put a sentria brushroll on any g series....they all perform the same...no diff whatsoever ... thats been my findings also in side by side testing and actual use at the shop and at home.....none of us at the shop are seeing any increase in performance after the br upgrade. Gotta say your dead on procare. turtle
|
|
|