Vacuum Cleaners Discussions

We are engineers at the University of Michigan and are designing a handheld vacuum for our design project. We would like you to take this survey to help us understand what consumers want in a portable vacuum. Any help would be greatly appreciated. Here is the link:
http://spreadsheets.google.com/viewform?formkey=dHNJYXdwZHNPUUpnTEZkUWRNNU1BZUE6MA ,

Edit: specified portable vacuum as handheld vacuum

Hi,

I checked out your questionnaire.  You need to do it over as there are too many questions left open and, as observed prior, you do not appear to have much recognition of types.

However, speaking generally, I'd like to see vacuums get back to more efficient design.  Meaning that lower electrical draw does not necessarily mean lesser performance and also meaning that super high suction can be a waste in machines not built to facilitate the best use of airflow.

Household vacuums should operate quietly and dirt disposal should be a clean, easy process.  One vacuum -- the number usually found in the average home -- upright or canister, should not only perform well on flooring but above the floor as well.

Regarding the issue of price, do the math. An affordable vacuum is always welcome.  I'm sure that with a little thought in regard to stats covering median income in this countryplus observanc of spending trends, you can work out a proportional idea of a price range that might prove attractive to the general public.  From there -- say the price you divine is $200 (only as an example) -- start trying to work out a a profitable machine that can be made within the confines of that level of pricing.  As it stands, a consumer magazine has just given a very high rating to a very inexpensive vacuum. A lot of what is on the marketplace is either made and priced to satisfy snob appeal or to tempt lead the lesser-moneyed masses to grab for their little piece of the pie.

To be fair, if you should choose to go the route toward high-end makings all I'd ask is that the end product justify the expense.

Making a good vacuum cleaner does take more than math and surveys. Focus isneeded.  The universal vacuum cleaner will never be invented nor will vacuums multi-task effectively in all areas.  Concentrate on carryng out the basics well.  Also required is real interest in the product, thorough knowledge of its use and a modicum of passion to produce the worthwhile.  Go back, do some more homework on your idea and come back with something good.

Best of luck,

Venson

inno1 wrote:

Thanks inno1.  This provides a clearer idea of what you're going for.

If a long lasting rechargeable battery (ideally one that at least would supply 30 minutes of effective run-time) could be developed for handheld vacs I'd welcome it.  Easy dumping and washable foam filters meant to last the life of the vacuum would also be a plus.

Has your group checked out the Hoover Platinum series rechargeables http://www.hoover.com/productcategory.aspx?use=46&ds=false

or the Black & Decker Flex? https://www.buyflexvac.com/Default.aspx?WT.mc_id=BDHomePageBannerFlex&TargetOffer=gettheflex

Personally, I much prefer corded hand and stick vacs as they allow me to keep going.

Venson

Let's assume for the sake of argument that Dustmite (aka Dyson Invents Big) is correct - that the Dyson handheld is standard bearer for handhelds.   Dustmite tells us that the Dyson has the best suction, and the suction is supposed to be constant. 

The design flaws of the Dyson are many - heavy, noisy, short use time (batter lasts about 5 minutes).    The shape makes it awkward to hold (like a paint sprayer).  I won't even get started on the price. 

I like that you have an option of attaching a turbo brush to the Dyson to make it more useful for cleaning carpeting.

I'd like to add a cord which would reduce the weight (by dropping the batteries) and it would also give unlimited run time.  

Designing a handheld is kind of tough because you kind of have to know how it will be used.  Some have rotating brushes that make them better for cleaning up pet hair.  Some rely on suction only.  Some send the debris through the fan, some use a bypass design to avoid damage from gravel and other objects. 

http://www.consumersearch.com/handheld-vacuums

 

Severus wrote:

Hi Severus,

Shark has been supplying a rechargeable with a motorized head option for quite some time.  http://www.sharkclean.com/cgi-bin/livew/site.w?location=b2c/retail-gateway.w&prodcat=01&feature=cat&frames=no&target=main&sponsor=000001

The models are cheaper and also more like the preferred "dustbuster" style.  Suction for any of these devices can never be a real issue until one that can actually come near matching the power of a household vac has been developed.  That one can sucessfully get up light soiling without a lot of to-do is enough.  In the test that I've seen, Dyson and B&D came out about the same leaving price as the greater determiner in regard to which I'd buy.

As it stands, since my favorite landlord has put electrical outlets in the garage I rent I can leave one of my old regular vacuum there and clean longer and better.

Venson

Personally I like two different kinds of hand vacuums - the cordless type where quick picks up can be done and corded ones for more sustaining power . I've always admired the old Dirt Devil Handy vac. It's old fashioned but it works superbly well and you can use paper bags if you don't like the idea of shaking the dust out the cloth bag at the back. More modern versions such as the Electrolux Stair & Car vac have a built in hose at the back for extra versatility:

http://www.electrolux.co.uk/node37.aspx?categoryid=13655

While the subject is open . . . does anyone here have knowledge of any great hindrances in making a cord/cordless handheld?

If my electric shaver can be used with or without a cord plus be plugged in just about anywhere in the world without an external power adapter, why is this technology being excluded from most rechargeable handheld and stick vacs? It certainly couldn't make many more expensive than they already are.

Venson

I cant quite remember but I'm sure Black and Decker had one of those hand helds out in the 1980s that had mains AND battery cordless power back up. Talking of cordless, Miele have just launched their new vacuum. See other link on here where latest vacuums are concerned.

vacmanuk wrote:

The Miele is certainly a clever design.  I wonder how much weight the battery adds to the Miele canister compared to a comparable machine without the battery capabilities.  Is the bag compartment smaller?   In other words, what sacrifices if any were made to add the cordless option to the Miele?     

Severus wrote:

Hi Serverus,

I'm curious too.  I checked out the Miele UK website and they appear to be being a bit closed mouth regarding some specs until the cleaner's official release date this March.  The following -- www.miele.co.uk/hybrid leads to webpage that let's you sign up for a drawing that will award about three people the new "Hybrid".  I did.  It's not that I could use a a 220-volt vacuum, I'd just like to win something.

An article about the pre-launch may be helpful.  Both my gizmos are going wiggy on me and I'm having problems with videos so I can't view them.

http://dustfluffgrit.blogspot.com/2010/01/exclusive-miele-hybrid-s4812-and-eco.html

One thing revealed is that this vacuum functions on up to 1800 (off 220 volts) when plugged in and 600 watts when used in cordless mode.  The lesser wattage should still be fine for cordless duty.  Per the article re the pre-launch the writer implies that the machine is heavier but not overly so.  Also, as the machine is considered part of the S4 series I am assuming the bag size remains the same.

And guess what. . .  the introductory price will be £499 -- almost $780 American -- which leaves me not too far off my guesstimate of $800 if sold here.

The Miele Hybrid is just a basic spec S4 with a battery pack underneath. It therefore uses the same 3.5/4 litre FJM bags as the current range.