Vacuum Cleaners Discussions |
|
M00seUK
Joined: Aug 18, 2007
Points: 295
![]()
|
 |
Dyson's first retail store opens as part of a trial run
Original Message Dec 10, 2009 7:58 am |
|
|
CarmineD
Joined: Dec 31, 2007
Points: 5894
![]()
|
 |
Re: Dyson's first retail store opens as part of a trial run
Reply #60 Dec 19, 2009 6:53 am |
|
Carmine sorry it took a while to reply to your question. The dc07/14 has held up on par with machines of the same build quality such as panasonic,bissell, dirt devil,some hoover machines, bottom end sanitaires etc. All in all the dyson is sealed up very well it will take a few more years to see how much fatigue under normal use the housings can take, the plastic [brittle problem] looks to be corrected. Their biggest headache is still in the brushroll, bearing department. A true circuit breaker set up in the dc17 would of been a big plus, but for some reason they just wont go all the way in making the machine user friendly, I mean why use a geared tooth belt and no true circuit breaker.For the price of the breakers its cheap insurance and makes for a happier customer.MOLE
Thanks MOLE. Based on the pattern of discontinuance of ALL previous dyson upright models, service considerations are not in the dyson repertoire. DC17 and DC27 are going the way of DC07 and DC14. Gone. Like the DC18 and on and on. It's about new product sales and scrub repairs. Lucky 1 made this observation here recently. I agree with him. That's the reason in large part dyson never warmed up to indies with its products and went the big box route right out of the gate here in the USA. And also the emphasis on non-vacuum products of late.
BTW, as you know the use of circuit breakers, fail safe switches etc, are features of better made and sold vacuum products. Carmine D.
|
DysonInventsBig
Location: USA
Joined: Jul 31, 2007
Points: 1454
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #61 Dec 20, 2009 2:02 pm |
|
Thanks MOLE. Based on the pattern of discontinuance of ALL previous dyson upright models, service considerations are not in the dyson repertoire. DC17 and DC27 are going the way of DC07 and DC14. Gone. Like the DC18 and on and on. It's about new product sales and scrub repairs. Lucky 1 made this observation here recently. I agree with him. That's the reason in large part dyson never warmed up to indies with its products and went the big box route right out of the gate here in the USA. And also the emphasis on non-vacuum products of late. BTW, as you know the use of circuit breakers, fail safe switches etc, are features of better made and sold vacuum products. Carmine D. You're full of crap. You need your own shop.
|
DysonInventsBig
Location: USA
Joined: Jul 31, 2007
Points: 1454
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #63 Dec 20, 2009 7:40 pm |
|
DiB-ster: Been there done that: Owned and operated my own vacuum cleaner sales and service store. For 42 plus years. How about you? Carmine D. Forty two years buys you what? The right to lie of good product and good men? As a dog returns to it vomit... you keep lying, as do many in your small niche industry. Dyson Invents Big
This message was modified Dec 20, 2009 by DysonInventsBig
|
Severus
If my vacuum can remove even one spec of dirt that yours misses, then mine is better than yours - even if there's no proof that mine would have picked up as much dirt as yours...
Joined: Jul 31, 2007
Points: 397
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #64 Dec 20, 2009 10:48 pm |
|
You're full of crap. You need your own shop.
Dustmite,
Are you saying that you don't have a problem with a $400-$600 vacuum leaving out features like circuit breakers to protect the motor? To me it's a sign that Dyson is not doing their homework. These aren't state of the art features being left out. These are features that have been around for a very long time, and for good reason. Tom Gasko once said that Dyson really needed to hire a vacuum historian so that they would avoid making stupid design mistakes (I'm paraphrasing, he was a little more diplomatic). It sounds like Tom was right on the money.
The smart tyrant writes his own story to ensure that it is favorable. The lazy will repeat lines from the book without fact checking.
|
CarmineD
Joined: Dec 31, 2007
Points: 5894
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #65 Dec 21, 2009 6:50 am |
|
Forty two years buys you what? The right to lie of good product and good men? As a dog returns to it vomit... you keep lying, as do many in your small niche industry.
Dyson Invents Big DiB-ster: Vacuums were a vocation for me for over 42 years, not a job. How about you? No need to lie. The products, the men who make/sell speak for themselves. I'm not saying I'm better than anyone in the vacuum world. I'm saying I discovered the truth about the vacuum industry after 55 plus years of experience and don't buy into marketing propaganda and shill speak. Carmine D.
|
CarmineD
Joined: Dec 31, 2007
Points: 5894
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #66 Dec 21, 2009 6:55 am |
|
Dustmite,
Are you saying that you don't have a problem with a $400-$600 vacuum leaving out features like circuit breakers to protect the motor? To me it's a sign that Dyson is not doing their homework. These aren't state of the art features being left out. These are features that have been around for a very long time, and for good reason. Tom Gasko once said that Dyson really needed to hire a vacuum historian so that they would avoid making stupid design mistakes (I'm paraphrasing, he was a little more diplomatic). It sounds like Tom was right on the money.
Agree, SEVERUS, better made/sold vacuums at the same price/less dyson vacuums have these inexpensive and simple features. For the good of the product and the customers.
I also agree with Tom Gasko. Dyson lacks the historical knowledge of the vacuum industry needed to prevent making the same mistakes and misques as those who went before. Carmine D.
|
mole
.
Location: earth
Joined: Sep 30, 2007
Points: 783
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #67 Dec 21, 2009 8:53 am |
|
Dib, I can understand your enthusiasm about your employer, but facts are facts take a dc17 and stall the brush rollor suck up a sock or rag into it. Please report back with your findings. Unfortuneatly in real world applications this happens a lot and damage does occur. B.T.W how are the canister sales going? have not heard too much fanfare about them anywhere. Carmine and Severus are right Dysons overpriced,mediocre performance, not user friendly,service centers are not there, With all the millions that Sir James has made you think its time to give back a little???????? MOLE |
DysonInventsBig
Location: USA
Joined: Jul 31, 2007
Points: 1454
![]()
|
|
|
Re: Dyson's first retail store opens as part of a trial run
Reply #68 Dec 21, 2009 5:30 pm |
|
Dib, I can understand your enthusiasm about your employer, but facts are facts take a dc17 and stall the brush rollor suck up a sock or rag into it. Please report back with your findings. Unfortuneatly in real world applications this happens a lot and damage does occur. B.T.W how are the canister sales going? have not heard too much fanfare about them anywhere. Carmine and Severus are right Dysons overpriced,mediocre performance, not user friendly,service centers are not there, With all the millions that Sir James has made you think its time to give back a little???????? MOLE Wouldn’t it be beneficial for the lying independent to have some Dyson work, warranty or otherwise? I do wonder if Dyson LTD has no alternative but to ‘throw some occasional work’ at these gnome’s and trolls. My DC15 has never burnt-out a brushroll motor, even when it's sucked up a sock. - Or course I shut it down immediately. Dyson Invents Big
This message was modified Dec 21, 2009 by DysonInventsBig
|
|
|
