Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides
Abby’s Guide > Vacuum Cleaners > Discussions > James Dyson carries the tired vacuum industry and just in time for Christmas...

Vacuum Cleaners Discussions

Search For:
DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

James Dyson carries the tired vacuum industry and just in time for Christmas...
Original Message   Nov 19, 2009 10:07 pm
The vacuum manufacturers are jumping on the Dyson free-ride big time this year.  I just visited my local Target and it looks like their Bissell's and Hoover's are almost fully converted to single and multi-cyclonic's.  And lookie, lookie... the mighty Electrolux (heavy as a tank upright) has almost caught up with the Fantom vacuum (Dyson dual cyclone technologies), I doubt it filters better than the Fantom's.

Electrolux @ Target 11/2009


Bissell Healthy Home v.2 @ Target 11/2009

This message was modified Nov 24, 2009 by DysonInventsBig



Replies: 3 - 12 of 18Next page of topicsPreviousNextNext page of topicsAllView as Outline
retardturtle1


Joined: May 16, 2009
Points: 358

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #3   Nov 20, 2009 1:27 pm
Severus wrote:
Dustmite,

Thank goodness that someone is taking that Dyson technology and combining it with a decent brush roll and nozzle. Many of the knockoffs clean better than Dyson at a much lower price. Those heavy bagless vacuums are really helping Oreck with their sales.

I agree......they jumped on dyson vacs ...where they fell short...they made an existing product better....giving the people what they want or have asked for...at a lower price.

Who cares who did what first......its whos doing it better at a lower price that matters....consumers could care less who did what first....if they can get what they want at a lower price.....theyll get it....no matter who makes it.  it just so happens that this time dyson had to foot the bill on this one.....[his idea ? ]....while others make it better and offering more......it is what it is......land of the free.      ''What gave dyson [or vac manuf] the idea that nobody could or would take what he made and make it / offer better....?

turtle1 

This message was modified Nov 20, 2009 by retardturtle1
iMacDaddy


Electrolux UltraOne EL7070, Bissell BigGreen Deep Cleaning Machine

Joined: Oct 30, 2007
Points: 110

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #4   Nov 20, 2009 3:00 pm
This is Eureka's rehash of their Ultra Whirlwind 4880/4885 design from earlier this decade.  It was a good machine; I had one.  I wonder why they were scrapped..?

DysonInventsBig wrote:
The vacuum manufacturers are jumping on the Dyson free-ride big time this year.  I just visited my local Target and it looks like their Bissell's and Hoover's are almost fully converted to single and multi-cyclonics.  And lookie, lookie... the mighty Electrolux (upright, heavy as a tank) has almost caught up with the Fantom vacuum (Dyson dual cyclone technologies). - Good for them.
DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #5   Nov 20, 2009 5:00 pm
iMacDaddy wrote:

Was a single cyclone separator used in this prior vacuum?

DIB


iMacDaddy


Electrolux UltraOne EL7070, Bissell BigGreen Deep Cleaning Machine

Joined: Oct 30, 2007
Points: 110

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #6   Nov 20, 2009 7:56 pm
DysonInventsBig wrote:
Was a single cyclone separator used in this prior vacuum?

DIB

Yep, no multi-cyclonic tech was used in the old Eureka.  It was almost the same layout as well, with the large debris container/shroud separated from the fine dust collection compartment.
Severus


If my vacuum can remove even one spec of dirt that yours misses, then mine is better than yours - even if there's no proof that mine would have picked up as much dirt as yours...

Joined: Jul 31, 2007
Points: 397

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #7   Nov 21, 2009 1:01 am
iMacDaddy wrote:
Yep, no multi-cyclonic tech was used in the old Eureka.  It was almost the same layout as well, with the large debris container/shroud separated from the fine dust collection compartment.
Actually it is a primitive dual cyclone machine.  The small tube on the right is the second cyclone.  It is slightly tapered.     While the dirt separation wasn't as efficient as Dyson's DC07, it had a superior brush roll and a manual height adjustment that enabled it to clean carpet better.    It also had a headlight.     It was rated very good for cleaning carpeting by Consumer Reports.  I belief it had a pretty good belt.   

The smart tyrant writes his own story to ensure that it is favorable.  The lazy will repeat lines from the book without fact checking. 
DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #8   Nov 21, 2009 10:24 am
iMacDaddy wrote:
Yep, no multi-cyclonic tech was used in the old Eureka.  It was almost the same layout as well, with the large debris container/shroud separated from the fine dust collection compartment.

Thanks, but I did not see it (a conical separator).  It looks like this Target-Electrolux is it, this is their first conical separator vacuum.

DIB
This message was modified Nov 21, 2009 by DysonInventsBig



nick_sub


Joined: Nov 19, 2009
Points: 5

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #9   Nov 21, 2009 12:34 pm
It's interesting to see other manufacturers using dual cyclone technology as I thought the patent ran out many years ago. I had assumed that they had been frightened to use it for fear of legal action by Dyson on any possible minor technical infringements after what happened to Hoover in the UK.

As for multi-cyclone technology, does anyone know if the patent for that is still valid? If not I wonder how Hoover and Bissell have managed to use them without infringing Dyson's patent?
DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #10   Nov 21, 2009 2:15 pm
nick_sub wrote:
It's interesting to see other manufacturers using dual cyclone technology as I thought the patent ran out many years ago. I had assumed that they had been frightened to use it for fear of legal action by Dyson on any possible minor technical infringements after what happened to Hoover in the UK.

As for multi-cyclone technology, does anyone know if the patent for that is still valid? If not I wonder how Hoover and Bissell have managed to use them without infringing Dyson's patent?

Nick,

This is one of the best questions posted here.  Non-Dyson multi-cyclonic’s will ultimately make billions for competing corporations. IMO, Dyson too narrowly defined his cluster (multi) cyclone patent/s, which is claimed to be [stuffed] inside the clear bin and fine dust collector - Bissell’s and TTI’s clusters are not.  They skirted the Dyson patent/s easily by plopping 'their' clusters on top of the clear bin (pulled them out of bin and dust collector) resulting in...  big, easy money to be made.


DIB
This message was modified Nov 21, 2009 by DysonInventsBig



CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #11   Nov 21, 2009 4:00 pm
DysonInventsBig wrote:
Nick,

This is one of the best questions posted here.  Non-Dyson multi-cyclonic’s will ultimately make billions for competing corporations. IMO, Dyson too narrowly defined his cluster (multi) cyclone patent/s, which is claimed to be [stuffed] inside the clear bin and fine dust collector - Bissell’s and TTI’s clusters are not.  They skirted the Dyson patent/s easily by plopping 'their' clusters on top of the clear bin (pulled them out of bin and dust collector) resulting in...  big, easy money to be made.


DIB



AND, less cost to consumers.

Carmine D.

iMacDaddy


Electrolux UltraOne EL7070, Bissell BigGreen Deep Cleaning Machine

Joined: Oct 30, 2007
Points: 110

Re: James Dyson carries the tired vacuum industry and just in time for Christmas...
Reply #12   Nov 21, 2009 8:56 pm
DysonInventsBig wrote:
Thanks, but I did not see it (a conical separator).  It looks like this Target-Electrolux is it, this is their first conical separator vacuum.

DIB


It's actually inside the assembly that holds the clear bin in place. It's located right above the shroud, lying horizontally, pointing left towards the dust tube. It's a rather stubby, short length tapered cyclonic apparatus.
Replies: 3 - 12 of 18Next page of topicsPreviousNextNext page of topicsAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.