Carmine... I know that the belt and filter are supposed to be lifetime.... what should I do to it when I get it? I always clean the scuff marks off and wax and spray Lysol all over a machine when I get one used.... I'll report back and let you know what I think of its performance.
Hello Bobby:
What should/needs to be done depends on the performance and condition. The lifetime HEPA, while it is self-cleaning every 6 seconds, may/should be removed and throroughly vacuumed and cleaned and reinstalled. You may/should remove the motor housing for the post motor filter. This is a charcoal gray fibrous filter. It should still be clean, almost pristine. But check it and if it needs cleaning, do so. Brush and vacuum. The motor on the Z has a plastic shroud which keeps it clean and dirt free. Excellent feature which HOOVER copied from the EUREKA bagless uprights.
Of course the screen mesh that is atop of the dirt bin. Vacuum the screen and the bin clean.
The agitator may/should be cleaned of any hair, rug wrap and dirt. Might even have to remove and inspect for ease of revolving. Despite what retailers initially said about the Z, it is not HOOVER WT technology. But, the agitator is wood, large, with excellent tufts for rug cleaning and grooming.
There are points on the Z where dust packs [clogs] are likely. One place is the rear where the rubber port is accessible for the purpose of unclogging. This port cover should be tightly closed at all times except to inspect and clean/clear the opening. Another point is the opening from the agitator housing into the vacuum. If suction is weak, this may be the cause. Easy to clear and clean once it is taken apart. ANd easy to take apart. Just alot of screws to undo. The hood completely separates from the bottom of the vacuum for easy cleaning and inspection of all the working parts for rug pick-up.
Inspect the lifetime belt. Make sure it is intact, no nicks, cuts, and wears.
Check the cord too. Wrap correctly so the cover will close correctly and securely. During use, ensure the cover is closed properly so it doesn't swing open/close. Not a good feature for this style of vacuum.
The electronic digi-touch control pad should be fine but run them through the tests to make sure.
If you have any questions, post here/email me privately. A happy to assist.
Carmine D.